Search results

I didn't say I didn't hate it! Having a 25' spool of 3/16 line, a tubing bender and a bubble flair tool made the job bearable.

They rust out as well. I replaced mine this past weekend. Also not a difficult job.

It is pretty easy, there are several 10mm bolts holding a protector shield covering it (rear wheel well) and 3 bolts inside the filler door. Several vacuum hoses and the main fill hose. Expect the 10mm bolts to break off due to rust. I drilled mine out and replaced with new ones. Took me a...

Are you in the rust belt? If you are, or if the truck lived there for several years, the filler neck assembly is probably rusted out. Rock Auto sells replacements.

I put Falken WILDPEAK A/T TRAIL All- Terrain Radial Tire-255/55R18XL 109V on my 2014 Outlander this weekend. Surprised they are pretty darned quiet. Not much different than the summer tires (Achilles ATR Sport2).

How does the Coke trailer meet the 60/40 rule?

HDPE moves around a ton with thermal changes. CoE is around 10x compared to steel. Temperature ranges from -40F to +185F should be considered for a vehicle interior. So a 225F temperature swing on an 8' length of HDPE will move 2.38". Whereas your steel frame in 8' will only move 0.14" in...

cool old tractor

Around 32 psi city/highway. LT285/75R16 BFG T/A AT KO2

Best answer

Not uncommon to be 10 to 15mpg city, 16 to 19 mpg highway. My Gen 3 in the winter (below 30F) city driving short trips is sub 12.

6333k2 The 6121K41 doesn't have a set screw. 6mm (0.236") shaft diameter on your Camp is close to 1/4" look at a 6333K2. Those ebay tone knobs are sweet as well.

I'll be selling my Edgestar 43 soon as it is too big for my new to me daily.

find a McMaster knob with a set screw.

$400 / hr!!! I assume that is somewhere in a metro California location?

Yep, same as Wisconsin. 15 to 20 years in the "rust belt" and the average vehicle is ready to be taken to the dump.

Starboard (HDPE) moves around a lot with temperature changes and is nearly impossible to bond with glue. I wouldn't recommend it for a primary interior build material.

Its a car, parts are expensive, google them up - lots of transmission issues. Hard PASS!

Leo (Leo Volk Matus) is on the Mitsubishi Montero facebook groups. Miserable to find anything on FB like normal

no shipping option?