Search results

Jim I don't have the coupler in front of me to verify, but I believe the picture, and kit, should have a second washer. The washer goes between the bolt head and the coupler. On the newest version of the coupler you should find (from the top down): Bolt Washer Vehicle side of coupler Flanged...

Using of a longer bolt would be helpful. You need to have threads exposed beyond the nylock nut. I think specs calls for 3 rings of threads beyond the nut. I'm sure that the coupler will function this way, but the design is spec'd for it to work the other way around. As stated you are now...

Doc, I think the difference is, your hinge was new when it was replaced, so removal was straight forward. This hinge had been in there for years and was wedged, rusted, cob webbed into place. I think we have all been there, working on older vehicles and having that one bolt that won't come...

Are both the inner and outer bearings going, or just the outer bearing? Our shop flatbed "eat" up a couple of outer bearings after the trailer was hit by a car, turned out the spindle was bent in relationship to the axle. If both bearings are going it may be that the assembly has been...

I think what Gabe is laughing about is that it may be a new product for Hallmark but Gabe and AT have been using the product for years. :-) While it is a wonderful product, it's expensive, difficult to work with (dust and glass fibers), and needs to be coated.

Yes it is.

If you do decide to keep the tire as a spare I would recommend that you seal the split up with Shoe-Goo. That way you will at least keep dirt and moisture out of the inner tire. From a road worthy point of view this tire should not be used on road. The integrity of the side wall may have been...

AT is just completing a build on a Sportsmobile. We built it for a customer who has three primary uses for the vehicle, WORK - anthropologist, SERVICE - search and rescue, PLAY - expedition travel. The Sportsmobile arrived with a bare interior and a pop-top and will be leaving our facility soon...

Paul, we are one of the few companies making trailer who do not use an internal frame for our component parts. If you don't have a large brake and the skills needed to make complex bends you would be better off making an internal frame work and skinning it. The reason I replied to your thread...

Why not come up with something original? You are willing to put some effort into trying to knock the Horizon off, why not use the time and effort to come up with something creative of your own? Copying a product doesn't move us forward, creating something new does.

There are regulations for all trailers used on road in North America. The Canadian and US regulations for lighting and reflectors are identical but have different codes. Here is a great summary of requirements and a poster for light location. In the US you must follow Federal DOT codes...

And your asking price is?

The rack is 48”(1219.2 mm) Wide x 64” (1625.6 mm) Long x 6” (152.4 mm) tall so it will physically hold a 35" tire with 29" to spare, to a tire and fuel cans will fit. Weight wise you'd be looking at around 200 lbs, which the rack can take. The only issue is you are putting a...

Snow can vary in weight due to the water content. I lived in the Sierra's for 27 years and have some experience with "Sierra Cement". Homes are built so that the roof can support 180 lb/sq/ft. I was used to waking up to 3ft of snow on the ground. This gives you and idea of the extremes that a...

You should be able to order now on the store. Orders for the next airfreight have to be in today so please get the order in or call us ASAP.

We have fitted a number of these racks to our trailers. The racks are very well made, extremely durable, and well powder coated. A little on the heavy side, but after all they are made of steel.

We have base plates in stock they were air freighted in a few weeks ago. I'll correct that on our site.

Not a stock item, but something that can be special ordered.

The only deal I know about is on a brand new 125 liter fridge. If you can fit that one in your vehicle it"s a smoking deal. It's 32.87"L x 19.5"W x 29.5"H, 46.5"H with lid raised. If you are interested in that one contact Paul at Equipt or myself.

National Luna fridges are subject to MAP pricing, so the pricing is the same from all the dealers. Competition is based on customer service rather than price. You can buy a National Luna from the importer, Equipt 1, or from us at Adventure Trailers, there is a list of other dealers on the...