Search results

Thanks for the input guys, I'll keep watching the portland junk yards. Seems like being patient will save a lot of $$$. Wanted to check to see if there were any other ideas on sourcing. Here's the new buggy, 2003, e250 w/5.4. 65k on the odometer. And with all the shelves pulled out of the back.

Does anyone have the definitive list of aftermarket van liners. I have a quig e250 standard cargo van and am ideally looking for an adrian steel plastic liner. Looks like many of these companies (AS, Penda, etc) have discontinued their econoline products. I really like the idea of a bombproof...

I put the cabela's trail gear seat covers in all my trucks, inexpensive and super durable.

Thanks Shenrie, really appreciate you taking the time to answer my question. Is your rig an e250 and what year, is there much difference between our trucks? Seems like there is plenty of space in the wheel wells and by measurement it looks like a 32 should fit easy. Have found best deals on...

And here it is, all the way from Pennsylvania to a new home in Oregon!

Apologize in advance but have read many posts here, on sportsmobile and general google searches but still can not find a definitive answer. I just bought a 2003 e250 quigley, standard cargo van and would like to run the tallest narrow tire I can get away with on 16 inch wheels. Am partial to the...

Anyone install the awd 6" lift?

Hello, I have a 2006 Chevy Express AWD that has been a great rig and now has about 130k on it. When I bought the van I was definitely wanting to go for the 4x4 econoline but landed with the chevy and have been happy with it. The thing gets to the ski area and handles snowy roads here in Oregon...

Thanks for the references, suggestions and help Bill, Happy Travels!

Well, it has been a few week but just tackled the project again this morning. Over the last few weeks I had put several layers of paint and two layers of the duplicolor bed armor on the underside of the board. The warden helped me get the board in this morning. So I cleaned off all of the...

Yeah I was a little surprised not to see painted edges, but I have to say that my Granby is one well put together product. Just showing some age. One thing to consider though, mine is a 2002 and knowing what I know now, if my bed board was still in good shape, I would pull out every screw, add...

So here is my replacement board. I cut the original in half while it was still in the camper then bisected the rotten half to get it out. I used the good half as my template for one side and the radius. The width is 4' and the length was ~ 79.5" . I have one coat of ACE barn and fence paint on...

Yep, I will definitely post some more photos. Nice to see some Oregon boys chiming in here. Cold windy day here in the upper Hood River Valley. Lets just say the Warden is less than thrilled about my painting project in her living room (no way that paint would dry in the 40 degree weather).

Thanks Bill, Scoured the other threads on WTW. Took your advice and called ATC. Marty was tremendously helpful. Told him where I am at and he gave me some great advice. I have the new bed board cut and the first layer of paint is on! Marty said that I should get the board cut about an 1/8"...

I don't think this strip can be removed, I think it is connected back into the frame? Otherwise removing it would be great! Anyone have experience with this?

If anyone else has shoe horned a new board in place I would be thrilled to hear recommendations! Will definitely be either using marine grade ply or 9 ply birch (have used this in new boat floors before). Plan on getting new plywood tomorrow and cutting the replacement board. Will probably use a...

Well, I have been busy this afternoon. Cut out all of the plywood, removed all screws from the exterior aluminum trim Not sure how to get the new plywood in with these boards in place. They are set in the aluminum frame, and the new plywood needs to seat below these boards. Here is...

Thanks guys, anyone have instructions on the best way to approach this. I am pulling the trim for a full replacement, just wondering if there are any tricks I should be aware of. Ie what to do with the wood blocks inside the aluminum frame on the inside?

Took my beloved 2002 Granby off to repaint the floor pack and the cab - over bed. The grey paint on the floor pack was starting to get fairly thin so have been sanding it down and after some research am going to coat the entire floor pack with the Duplicolor Bed Armor roll on bed liner...

Thanks to all of you for your follow up. Stan it speaks directly to your product and business with such a committment and your offer. I sent you an email with some additional information. Rotti, your photos are awesome and i have been spending a lot of time on WTW as well. I guess the bottom...