05+ Radio Facia Removal??

viatierra

Explorer
I finally picked up a Ram mount for my GPS and want to investigate where I want to install it.

I've done a little searching around but haven't found anywhere that discusses removing the textured aluminum facia around the radio. Anyone here done it?
 

maxama10

Welcome to Nevadafornia
stick a putty knife under the climate control and pry, it just pops out, after that there are 4 bolts holding in the radio, 10mm I believe, undo those and then the entire thing pops out if you pull. From there you should be able to take of the faceplate.

-Max
 

Dave Bennett

Adventurist
maxama10 said:
stick a putty knife under the climate control and pry, it just pops out, after that there are 4 bolts holding in the radio, 10mm I believe, undo those and then the entire thing pops out if you pull. From there you should be able to take of the faceplate.

-Max

Exactly, but I recommend using a plastic putty spreader from the local paint department to avoid scratching the dash... four 10mm bolts are all that secures the head unit.
 

Forum statistics

Threads
190,015
Messages
2,923,186
Members
233,266
Latest member
Clemtiger84
Top