Technically LFP batteries w/BMS are easier to charge than others.. you just need one stage, can be dumb as a box of rocks as long as you can set the constant voltage output.. the trick is, you disconnect the charger entirely when its full or put the float voltage low enough its not actually going to take any current once full.
For my BB, most AGM profiles are perfectly adequate for providing a charge current.. it might take a lil bit longer, and might not get it to 100% entirely.. but thats okay, thats not abusive to LFP.. the thing is, my battery will take .5C charge rate.. I can go from empty to full in 2.5h w/a 40A charger, I wanna take advantage of that, and its 4-5x the charger a FLA of same size would need.. so yeah, end up paying more to take advantage of LFP's fast charging capabilities.. not because it required some special magical 12 stage charge fomula.
IIRC, I found setup instructions for Sterling Chargers on BB's page.. even though they support Lithium, they recommended the AGM profile and not the Lithium profile for safety concerns.. because when you put it in lithium mode, it just gets dumber.. not smarter.