2000 Tundra "catch and release" expo rig

[busmup808]

I just converted the 2nd row Captain to the 60/40 bench. I am only asking you because modifications come 2nd nature for you. It came from a 07 Limited and Is oak leather in color. Comes with the center console between the seats


Sent from my iPad using Tapatalk

 

[busmup808]

Some pix of the seat and console

Sent from my SM-G900V using Tapatalk

 

[Sal R.]

Yes. No difference

That's what I figured. Thanks for the input. Now to source the parts!

Additionally, there was no mention of new brake lines. I assume the existing brake lines will work with the WH calipers?

Thanks!

 

[AddictedOffroad]

Just listed it for sale
http://www.expeditionportal.com/for...-2000-Tundra-Expo-built-ready-Fort-Collins-CO

 

[bkg]

Wow... didn't see that coming...

 

[AaronK]

Just listed it for sale
http://www.expeditionportal.com/for...-2000-Tundra-Expo-built-ready-Fort-Collins-CO

Catch and release was no understatement 😛

Sent from my OnePlus One using Tapatalk.

 

[Deleted member 9101]

I will also be swapping in a 1" bore master cylinder as well.

What ya getting it off of?

 

[Deleted member 9101]

So, most guys with Tundras do the Tundra 231mm brake upgrade, but this one will be a little different.

I recently torn down a 4th gen 4runner IFS system. So, these are off of a 07 4th gen Sport Edition model. They will ONLY work with 17" wheels and grinding is required as well as 1.25" wheel spacers. But, the rotors are 338mm in diameter and the calipers are 13WH calipers and are also 231mm.

Sooooo, sis you have to use the spacers because of your rims? Did you need the spacers because the caliper hits the back side of your spokes, or the rim its self?

I have the "fat six" 20"s and am curios if I would have any fitment problems. When I eyeball it, it looks like I have a ton of room to work with.

 

[GTV]

The 338mm rotors were used with 18" wheels from the factory, so unless you are using 18's (or larger) then you'll need spacers so the calipers clear the hoops. 16" wheels will not fit at all. Your 20's will be fine.

At least that's how I understand it.

I asked about the MC as well, never got a response. I guess he never did the swap, it probably wasn't needed.

 

[AddictedOffroad]

What ya getting it off of?

2nd gen V6 4runner

 

[Deleted member 9101]

2nd gen V6 4runner

I know what I'm hunting for the next time I'm out at pick-n-pull. I assume it drops right in with no issues?

Thanks for the information, you are giving me a few weekend projects

 

[AddictedOffroad]

I know what I'm hunting for the next time I'm out at pick-n-pull. I assume it drops right in with no issues?

Thanks for the information, you are giving me a few weekend projects

Bolts in.

 

[Deleted member 9101]

The 338mm rotors were used with 18" wheels from the factory, so unless you are using 18's (or larger) then you'll need spacers so the calipers clear the hoops. 16" wheels will not fit at all. Your 20's will be fine.

At least that's how I understand it.

I asked about the MC as well, never got a response. I guess he never did the swap, it probably wasn't needed.

Ok, thank you. Much appreciated.

 

[Deleted member 9101]

Bolts in.

Score! Then I'm snagging the next one I see. They seem to be a dime a dozen around here. Tundras on the other hand...not so much...lol.