2005 Fuso FG140 4x4 Intro and Build Chronical

[MSGGrunt]

Then if that is the case, I should have 8 valve stems and not 7 and you would think 4 of one kind and 4 of another if in fact the inner and outer stems are different.

 

[SkiFreak]

I did not realize you were showing exactly what valve stems you received; I thought that was a sample... Stupid brain, DOH!
As I see it, you should have 4 x short metal and 4 x long metal valve stems.
I'd be contacting the supplier, as I am pretty sure the 3 x black rubber ones are not suited to those super singles.

 

[MSGGrunt]

I emailed Fuso Off-road, who I bought the wheels from and have not gotten a reply. I'll try reaching out again or emailing the manufacturer in Australia directly.

 

[MSGGrunt]

Per AAV 4x4's website: Each rim requires: ·1 x high-pressure valve ·1 x 90-degree valve stem

Super Single 6 Stud 17X9" Fuso/Isuzu Rim 517.072.010

Super Single 17x9" Steel Rim – 6-Stud Fuso / Isuzu (Part No. 517072010) Built tough for Australian conditions, the Super Single 17x9" steel rim is purpose-designed for Fuso and Isuzu 4x4 trucks with a 6-stud hub pattern. This rim converts dual rear wheels into a single wide-track setup...

aav4x4.com.au

 

[Ferjablito]

Do you also put a 90-degree stem on the front ones?

 

[MSGGrunt]

I have not mounted the tires, but yes, each rim gets two valve stems. I presume the 90-degree ones are so you can rotate the tires and mount the rim in either direction. The 90-degree valve stems eliminate any clearance issues on the front with the brake drum.