Ok getting started on prepping this thing, just some simple things so far but more on the way. GAP tool was the first thing I ordered, I pulled off the auto running boards that didn’t work to begin with, replaced the third brake light that the lens had begun separating from the housing on, and then I added rods and did wheels and tires cause 22s are just not gunna make for enough tire for how I am gunna be using this thing.
View attachment 573521
So there it is, I went with the terrafirma steelies and wrapped em in the falken at3w as a 285/75r18, currently lifted with proud rhino rods and used my GAP tool to make sure everything was sitting at the proper height.
Had to do some liner mods of course, and also remove the washer bottle, so I built and installed a smaller bottle.
View attachment 573526
So I used a small universal washer bottle, added the level sensor to the bottom of it and the factory fill neck to the top, and secured it up out of the way on the “frame rail”