Finally!! Direct bolt 1 piece aluminum 20x10 super singles F450/F550

[ripperj]

Any combo of flipping these around so they would work on a Ram 3500 single rear wheel?


Sent from my iPhone using Tapatalk Pro

 

[Eldgen]

Front and rear track at 92”. They run much nicer on the road then the multi piece wheels and discount tire was able to mount the tires for me. I never found a tire shop to work on the multi piece wheels.

335/80r20 MPT81 and wheel weight 179#

wheel is 59#

Hey Justin, these look great. I personally do not run spares, are you sticking to the 5 wheel minimum?

 

[wehring]

Thank you. I am very pleased with how they turned out.

i will sell 4

 

[wehring]

Well, it was a long shot. But worth a try.

Sorry Just Browsing… i missed your previous reply.
the air valves do not allow for TPMS but you can install TPMS with a band in the center of the wheel on the inside.

i went with 20x10 instead of 20x9 for a wider range of tire selection.
Please feel free to call and talk. Always happy to answer questions. 979 997 3112

 

[wehring]

First set of coated wheels

 

[java]

I really hope someone makes a little higher load rated 36-38" LT. I just am still not sure about running one at the load limit..... Might sway me to buy these at that point.

Sent from my SM-G973U using Tapatalk

 

[wehring]

Wheel are in stock and being mounted on some nice trucks

 

[mog]

Nice trucks, but the white & red one is the best looking by far

 

[wehring]

Nice trucks, but the white & red one is the best looking by far

thanks for the kind words.

I also ran the international MXT wheels like yours on my Topkick. These new wheels also come in 8x275 and are rated for 8000# ea.

 

[jerstw]

Wehring - Just wanted to say it is great to see a person focused on finding a solution that works for themselves and is willing to go through the effort to offer it to others. Look forward to reading you have "sold out" and a second batch is in production.

Cheers

 

[cobro92]

Wehring.

Being an expert on F450/550 wheels and tires, are there any other tire choices with the 5k+ weight rating that are better in the snow than the MPPT81? Seems there are a lot of benefits to using a rig like this but I’m worried about the snow performance of these military tires.


Sent from my iPhone using Tapatalk

 

[wehring]

The cutoff is 4100# per tire. There is a Y in the road at 8200# on the rear axle. If you are at or under 8200# then you can run an LT bead tire. I have been especially impressed with Nitto trail grapplers. They balance with very little weight. Recently mounted five 37” tires and 3 took no weight. The other two needed 2oz on one and 3oz on the other.
If you are over 8200# then the MPT tire is required. I prefer the MPT81 over the Goodyear G275 for ride comfort. You may want to try siping the treads to provide better snow road traction.
I have been driving on cold roads for a few days and the truck has been surefooted with the MPT81s

 

[wehring]

Wehring - Just wanted to say it is great to see a person focused on finding a solution that works for themselves and is willing to go through the effort to offer it to others. Look forward to reading you have "sold out" and a second batch is in production.

Cheers

Thank you for the kind words. The response from people needing a better super single solution has been strong and I am humbled to facilitate the solution. We are on our 3rd run and will place an order for the next run when I return from this “promote the wheel” tour of 5,000 miles on the road.

 

[mog]

thanks for the kind words.

I also ran the international MXT wheels like yours on my Topkick. These new wheels also come in 8x275 and are rated for 8000# ea.

Man, you have to get the word out to Kodiak/Topkick guys! Wheels for super singles are the bane of our existence. There are not any good off-the-shelf options in 8x275 (I run modified Alcoa wheels).

 

[wehring]

Man, you have to get the word out to Kodiak/Topkick guys! Wheels for super singles are the bane of our existence. There are not any good off-the-shelf options in 8x275 (I run modified Alcoa wheels).

Please call me. 979 997 3112