Isuzu npr 4wd

[gator70]

Personally, I don't see how this would be advantageous, given the shallow depth of your storage box.
Adding a sliding shelf will actually result in a small loss of usable space.

Yes correct, but the door when open as you see it, creates an access problem due to the depth of the door. Due to the bumper placement the door must not drop lower.

 

[gator70]

I forgot to mention, on the rear of the sliding shelf will be a vertical Molle Panel in Aluminum

 

[whomisi]

Yes correct, but the door when open as you see it, creates an access problem due to the depth of the door. Due to the bumper placement the door must not drop lower.

Can't you install it upside down with gas struts to hold it up? On the truck it's probably above your head when open

 

[gator70]

Can't you install it upside down with gas struts to hold it up? On the truck it's probably above your head when open

Interesting idea. I wanted to modify the door and create a table.

 

[gator70]

My storage box cost 82% less than this

 

[SkiFreak]

My storage box cost 82% less than this

But which one is more functional?
It's not always about cost.

 

[gator70]

Considering a second spare tire. Just the rubber. When you get a flat, and if there is sidewall damage a new tire may be required. Theses tires can be 5 days to two weeks wait for purchases. Carrying an extra, just the rubber can be cheap insurance .

 

[SkiFreak]

Considering a second spare tire

With every option there are normally positives and negatives.
The positives you listed are all correct, but on the negative side, you have to find somewhere to store an extra tyre case. You also have to find space for the tools required to fit/remove a case from the rim.
You would also require a decent air system, as you will need some good air flow to seat the bead onto the rim. I know there are other ways to do this, but some are potentially dangerous.
If you make space for one thing, something else probably can't be taken. It all comes down to your priorities.