LETS SEE YOUR TRAILERS!!!!

[CoronaKJ]

 

[abart]

Not an off-road type trailer but it does serve as a "command base" when i go out exploring in the Jeep. I haven't had it long enough to get many trips under the belt (or many pictures) but the Jeep pulls it well and the camper is in good shape. I am sure I will tinker with both to get them just right. A 2001 Wrangler and a 1977 Starcraft Starmaster 6 and they will hopefully serve many years of fun! :wings:

 

[Ziv]

Last winter I built this little trailer. Except for the axle, wheels and springs, it is 100% aluminum. Dry, it weighs less than 350lbs … closer to 300. It wasn't designed for pulling over tough rocky trails, simply secondary and tertiary Forest Service roads. Some will be surprised at the tire choice. Me, too. Benefits are that they are light, cheap and available everywhere for about $60 mounted. I keep 2 spares inside the trailer. Material costs to build the trailer was less than $450. It's not perfect, but it works.

 

[Dawgboy]

My '67 Montgomery Ward. It's going to get some rebuild work as the floor is rotted in the corners and one complete roof bow was missing completely. The tent is in great shape, and it's an Aluminum body so very light. With it hitched, I can pick up the back end and carry it...

I'm thinking of painting it to match my van, and use it as the "kid's room" when they come along on camping trips.



It's wonky looking because one of the roof bows was missing. I have made replacements for the center ones, but not installed yet. Need to replace that floor first.


Brought to you by Cyberdyne Systems

 

[Dr. Marneaus]

My '67 Montgomery Ward. It's going to get some rebuild work as the floor is rotted in the corners and one complete roof bow was missing completely. The tent is in great shape, and it's an Aluminum body so very light. With it hitched, I can pick up the back end and carry it...

I'm thinking of painting it to match my van, and use it as the "kid's room" when they come along on camping trips.

View attachment 189006View attachment 189007View attachment 189008View attachment 189009View attachment 189010

It's wonky looking because one of the roof bows was missing. I have made replacements for the center ones, but not installed yet. Need to replace that floor first.


Brought to you by Cyberdyne Systems

Thats so freakin cool!

 

[reece146]

They are cool. I have a similar trailer. the plan is to convert it into a slide in for my MJ.

 

[vati kaki]

Still need to paint fenders black ,but getting there

Sent from my SPH-D710 using Tapatalk 2

 

[kwill]

View attachment 180030
Something about the shape of this trailer appeals to me.

 

[Reddirttj]

Still need to paint fenders black ,but getting there

Awesome. New ideas are forming in my head now.

 

[Crush Jeep]

It's a work in progress, everytime I think that I'm done with it I think of something new.
Here's the before.

And here's where I am now.

Here's my rig set up at Cape Lookout this summer.

My build site is below, I'm (actually my brother is doing it) currently putting a bumper and side rails on it.

 

[grogie]

Edit

 

[mrchips]

Wife and I leaving Kennedy Meadows

 

[FandL]

1953 M101A1 resurrection in progress

This in my 1953 M101A1 used by the Army in the Korean War. It was purchased in a military action and then sat for over 40 years in a field that became a forest. I resurrected this pice of history last month and plan on rebuilding it from the ground up....

 

[nickmimi]

This in my 1953 M101A1 used by the Army in the Korean War. It was purchased in a military action and then sat for over 40 years in a field that became a forest. I resurrected this pice of history last month and plan on rebuilding it from the ground up....

nice find. good luck with rebuild.

 

[Wnmshoe]

The red one is just the right size for my 92 YJ, 2.5 4cly. Do you have any build details you could share?