k some better pictures in the daytime.
Here's the stainless steel brackets that will be on the outside that will bolt to the plates on the rack. There's a small lip so we welded a ground down rod to catch it.
What the finished product looks like...
Put the led bars on.. All the wire run inside the rack, towards the back corner where the ladder is. It will run through the ladder and underneath the van near where the spare tire was. The battery wires will go up there too.
One for reverse too..
I put up all the arms because the upholster is going to come by tomorrow to test fit the awning. This will give you a better idea of what it will look like.
It's about 6' from the ground to the tip of the arms.