Mission Dawn Patrol

volcomsurfer

Adventurer
I used this velcro.. http://amzn.com/B00006RSP1

I did use some 3M spray adhesive 90 on it too just for s&g, but the velcro was definitely sticky enough by itself.

I used dupli-color bumper and trim paint. http://amzn.com/B00R244NGE

It's expensive, but turns out really nice, covers great, and the nossle is easy on the fingers. My only gripe is that you can't tilt the bottle much without having to shake it all the time.
 

volcomsurfer

Adventurer
So I started mocking up the cabinet. I made a template to match the curve of the wall panels.

0BC9C416-8C8C-4EB8-8358-F551F31213EA_zpskjt11vrv.jpg


43C81074-C911-4C72-B780-809C2ECB34AD_zpsl3xrjc8r.jpg


0390C05E-E8FF-4882-9331-753D6583EC45_zpslpwm0iww.jpg
 

volcomsurfer

Adventurer
I put in the motion lights today.

DEE25CF9-3176-4B8A-982B-21FBE4A5185A_zpsts2ei3nv.jpg


78E29A90-D3B7-400C-B909-5DC3447E5202_zpsh3sfsxze.jpg


AA351898-33E2-4EFB-AF02-50416698A233_zpsf3nxyujn.jpg


D7B8B692-FE07-4C50-9C8D-15B4BF174C2F_zpskdkosdpv.jpg


3A20C8F5-8874-4490-979C-34ABF941966B_zpsylk4dpk6.jpg


Also cut the hole for the heater exhaust

6ABC01AC-B45F-4FEB-B691-436FA0262765_zpssl4zcvjc.jpg


16E5BFE4-0A72-4D92-A889-7FA7650C20BE_zpsyryl6189.jpg


Now I'm ready to sand the cabinets, lacquer them, and put it all together. I'll probably do that tomorrow morning. Today seems like a good night to go out to a bar and talk trash to FSU fans. ;)
 

volcomsurfer

Adventurer
so I finished all the cutting, sanding, and lacquer for the cabinet.

A14935D1-4F64-4658-AAD4-A7DF76D6CA91_zpschdgqa8x.jpg


78DD6BF5-2273-434C-8A19-248EC35B83BF_zpse4wpedyq.jpg


8FC38DDE-F3CE-463D-850A-CDE73DF9F194_zps8pb9txey.jpg


Plenty of room for wires and ventilation.

E1399A6D-6828-4737-80FE-071ED66E5606_zpsds1x1xw1.jpg


I used pipe insulation inbetween the panel and the window
349A2C12-D7B7-4E09-9B89-778210B94A39_zpskquisc32.jpg


AF8E409B-5D1E-419D-97F3-E1B24B104522_zpsll9qyqvj.jpg


485D1D31-EE7A-4032-9DEA-8904DE44C3F5_zps4gedhgl9.jpg


I put down some felt to prevent splinters on the mattress.

77EEE80C-00D7-4843-B0EC-A5E6C014949B_zpsiec15ffl.jpg
 

volcomsurfer

Adventurer
so your bed will be across the back, what is the measurement between the walls?

5'11"

Finished the front piece today. Also threw up the lights under the toe-kick. I think I'm moving the toilet to the other side too. I mocked up the flooring to see how it is going to look all together.

D4EB93E0-AB49-4159-8889-328BBD805244_zps7afvpsrs.jpg


661D7530-63E6-4124-B31C-CBD193A39642_zpsjcx3nwbf.jpg
 

volcomsurfer

Adventurer
I put in the shelf for the table
9C0DACE6-1A1E-44F9-9E7F-B5373C60FC42_zpspwprawil.jpg


Got the 30 Gallon water tank in too.
C590295F-4DD7-4829-804A-A7B0282F4232_zpsit1wrk1v.jpg


Floor is complete
C5667711-114F-4B5D-8956-1A80C41818CA_zpshflzog1t.jpg


We finally got some waves so work as been put on hold.
 

Forum statistics

Threads
187,853
Messages
2,899,041
Members
228,996
Latest member
Oregon Duck
Top