Arya Ebrahimi
Adventurer
I then moved on to the airbag and bump stop mounting. I wanted the airbag outboard as close to the hub as reasonably possible to reduce the leverage effect on the trailing arms. I then gave the bumpstop second priority, placing it slightly ahead of the axle centerline on the trailing arm. I will need to space the bumpstop down slightly to properly limit max compression on the airbag.
Next up is shocks and limit straps. Then I need to reattach the tongue as it had to come off to allow the suspension crossmember to go in the right place.
I'm optimistically hoping for a test tow this weekend :smiley_drive:
Next up is shocks and limit straps. Then I need to reattach the tongue as it had to come off to allow the suspension crossmember to go in the right place.
I'm optimistically hoping for a test tow this weekend :smiley_drive: