slimtwo
Adventurer
So, today I focused on the “wood bin/propane/what ever else needs to go in there”, bin. Not much to tell really on the fab side. I had to work out the angle for the ends of the lower frame, and then on the top rail, I did a miter joint. The lower joint was 15 degrees. And I kept the front rail straight, in case I want to use the end to plug in a small table for the stove, or something. I will have to get the sheet metal for the front and sides, and RW has the expanded metal I will use for the bottom. Also, in the corners at each end of the rack, I will put heavier sheeting to bear the weight of the propane bottles (2). One will be for the stove and lantern. The other for a future gas fire pit. With all of the fires, and the fire restrictions, it makes sense.
![09202103.jpg 09202103.jpg](https://expeditionportal.com/forum/data/attachments/586/586043-0f52bab35790bc2fe6209ff79800d451.jpg)
![09202104.jpg 09202104.jpg](https://expeditionportal.com/forum/data/attachments/586/586044-9a0f25be61dc3dcc941f72931e03c47e.jpg)
All for now.
Happy Trails!
![09202101.jpg 09202101.jpg](https://expeditionportal.com/forum/data/attachments/586/586041-37cc6eb7ddaa57b4b21d3572008a6bde.jpg)
![09202102.jpg 09202102.jpg](https://expeditionportal.com/forum/data/attachments/586/586042-dd34aa1697dfddfcdcbeca56988c0ebc.jpg)
![09202103.jpg 09202103.jpg](https://expeditionportal.com/forum/data/attachments/586/586043-0f52bab35790bc2fe6209ff79800d451.jpg)
![09202104.jpg 09202104.jpg](https://expeditionportal.com/forum/data/attachments/586/586044-9a0f25be61dc3dcc941f72931e03c47e.jpg)
All for now.
Happy Trails!