Back to work on the sliders. Finished wiring up the first slider and now onto the second.
Here I've soldered the connections and applied a coat of liquid electrical tape to seal out any moisture.
Now slide the heat shrink over the coated connections and shrink it in place.
Wired and ready to bolt up. I installed SAE plugs to connect the sliders to the wiring harness on the van itself, before installation I tested the wiring/lights and they all lit right up
And bolted up.
Mud flaps should do a good job of keeping the rocks from chipping off the rocker panel paint. You can see evidence of rock chips from past gravel roads.
The finish on the sliders matches the RMW bumpers perfectly.
Now I just need to get time to wire the lighting to the van.
Hodakaguy