New mopar bumper on 2013 Jeep Moab

[thompson]

I like this bumper alot. I'm thinking there are tow hooks befind the bumperet's and it looks like smoked rectangular fog lights in the middle..what are those? Looking for a not so heavy full front protection with good aerodynamics. Anyone seen this in person or have one already?

 

[TexasTJ]

It's the American Expedition Vehicles Non Tube bumper sold through Mopar. you can get it straight from Mopar of AEV.

 

[cwadej]

You can find it here:
http://www.quadratec.com/products/12049_1202_07.htm

I too like it, i'm just too poor for it.

 

[TreeTopFlyer]

The tube version weighs 120lbs. about 80lbs for the bumper, 20lbs for the winch plate, 20lbs of hardware.

 

[Dendy Jarrett]

As stated, this is the AEV non tube (standard) offered bumper. Those things that appear as smoked rectangular fogs are just air vents to aid in air to radiator and slow drag. (aerodynamics).
Thanks
D

 

[Rynomar]

The plastic covers on the bumper actually cover the crush cans. There shackle connections under the bumper tied into the frame though. Also, the two rectangular pieces are metal mesh attached to the bumper. You might be able to fit a pair of Rigid SRM's in the space, but I think it would be a little too small. I will measure it later though. I have the tube version of the AEV bumper, which is very similar. Don't know if this will help you see the shackle attachements or metal mesh, but there you go!