Parts and Accessories Sources: G-Class

[Titus Pullo]

Suspension lift coil spring spacers (30, 40, 50 mm.), radius arm bushings, Panhard bar bushings, offset radius arm bushing set for caster correction. Coil springs for actual lifted vehicles or for heavier loaded vehicles, as well as different thickness G-specific hub centric wheel spacer in development right now.
All of this from TPS - TitusPullo Suspension. http://www.expeditionportal.com/for...trailing-arm-bushings-Mercedes-G-W460-461-463

 

[ILIAN]

Titus, see if you can make some hubcentric wheel spacers that fit the Hutchinson Beadlocks center bore perfectly. I believe they are 1 mm bigger than the G hubs. Check with someone here who own the beadlocks. They will gladly buy your spacers to get rid of vibrations. I will too when I get the beadlock wheels.

 

[mk216v]

Titus, see if you can make some hubcentric wheel spacers that fit the Hutchinson Beadlocks center bore perfectly. I believe they are 1 mm bigger than the G hubs. Check with someone here who own the beadlocks. They will gladly buy your spacers to get rid of vibrations. I will too when I get the beadlock wheels.

You'll need to bore out the centerbore of the Hutchies first. Then fab a "hubcentric" spacer insert. IIRC the centerbore of the Hutchies is 55mm, the nose bore of the G hub is 54mm. Tony at Motorsports in Portland OR is already working on this remedy for Hutchinson.

 

[artiei]

I'm also keeping a running list of folks I actually have used on my blog. Here is a link to the page:
http://snowgwagon.blogspot.com/p/links.html

 

[Titus Pullo]

Titus, see if you can make some hubcentric wheel spacers that fit the Hutchinson Beadlocks center bore perfectly. I believe they are 1 mm bigger than the G hubs. Check with someone here who own the beadlocks. They will gladly buy your spacers to get rid of vibrations. I will too when I get the beadlock wheels.

I can probably do that as long as I have the right measurements as I dont have a set of hutchies in front of me.

 

[ILIAN]

These guys make a nice camp table for the G. http://terrawagen.com/g-wagen.

 

[mk216v]

These guys make a nice camp table for the G. http://terrawagen.com/g-wagen.

Oh yeah Eric and Josh make great stuff, and terrific guys to boot(of course, they're Oregonians! )!

 

[Steve D]

Couch Off Road Engineering

Couch Off Road Engineering in Denver is now providing all parts for the G Wagen and Unimog trucks. We also can order 1017 parts, bus, van and truck parts. Most service parts are in stock. We place an order from Germany every 3 weeks and if you are in a hurry we are more than happy to place an expedited order. If you need parts break down drawings let me know and I can send them to you. We have sources for used parts and good prices on Unimog body panels.
We service all diesel Unimog trucks and will be servicing G Wagens in the near future. We do a lot of custom accessories and build trucks to the owners specifications. We will also be offering portal axles for the G Wagen trucks.
We sell Unimog and G Wagens. So let us know what you are looking for and we can find it for you. Take a look at our web page and lets us know if you have any questions.
Thank you,

Steve Dempsey
www.couchoffroad.com
steve@couchoffroad.com
888-986-4664

 

[mk216v]

Couch Off Road Engineering in Denver is now providing all parts for the G Wagen and Unimog trucks. We also can order 1017 parts, bus, van and truck parts. Most service parts are in stock. We place an order from Germany every 3 weeks and if you are in a hurry we are more than happy to place an expedited order. If you need parts break down drawings let me know and I can send them to you. We have sources for used parts and good prices on Unimog body panels.
We service all diesel Unimog trucks and will be servicing G Wagens in the near future. We do a lot of custom accessories and build trucks to the owners specifications. We will also be offering portal axles for the G Wagen trucks.
We sell Unimog and G Wagens. So let us know what you are looking for and we can find it for you. Take a look at our web page and lets us know if you have any questions.
Thank you,

Steve Dempsey
www.couchoffroad.com
steve@couchoffroad.com
888-986-4664

Cool stuff Steve, good to see you still in the biz.

-Jeremy

 

[Terrawagen]

G-Wagen Fender Clips in Stainless Now Available

Terrawagen introduces a new G-Wagen part!

We have a solution for those rusty fender attachment clips. Our clips have been reproduced in stainless steel to the exact dimensions of the original part.
You can find them on our website www.terrawagen.com/g-wagen
They're cheaper than the originals too!

 

[Steve D]

Portal axle kits are now available.

We now have the TIBUS portal axle kits available.
http://www.couchoffroad.com/catalog/axles-axles/portal-axle-kit

 

[mk216v]

Sweet!!

Steve, the Tibus will fit both W460 and W463?

 

[Steve D]

Sweet!!

Steve, the Tibus will fit both W460 and W463?

Yes, They fit the 460 and 463 trucks.

 

[mk216v]

Yes, They fit the 460 and 463 trucks.

Cool, may want to update your site page so there's no confusion/lost sales.

 

[jackajm]

IronMan4x4.com

Check these guys out they have bull bars for the G500. I have ordered one not from the USA division but the Australian division it should be coming in by mid October.