penski61/sexy6chick's 02 SAS

[bac0701]

sick truck mang, what tire size? im starting to like these nissans

 

[penski61]

35 x 12.5 15 km2's
i thought i put these in here but guess not i changed the design of the rear bumper originally shown in the first couple of pics

, here are some shots from this weekend

 

[AZ-Ted]

Looking good Aaron. I like the gas can and CO2 holder.

 

[Stan the Man]

sick build.

 

[Cypher]

The can and tank holder is awesome! Great work Aaron...

 

[penski61]

alot of things have been done since the last update
installed toyota rear leaf springs up front and one leaf from the old leaf pack
installed custom valved fox shocks along with limit straps and relocated bumpstops

installed 10" travel driveshaft

moved the gas tank from under the truck and into the bed , possible 4 link in the future

Slip yoke eliminator

moved everything back to fit the gas tank in the bed

high lift mount with gas tank underneath

here are some shots that the BN guy wanted of the mud flap mounts

 

[penski61]

added some rock lights , i have 4 of these one in each wheel well

then one light up front behind the bumper and (2) about the center of the truck

 

[penski61]

video testing all the new stuff out
http://www.youtube.com/user/neh0209#p/u/4/xAGH9M1skFo
http://www.youtube.com/user/neh0209#p/u/2/FSAnyEdmiQg
http://www.youtube.com/user/neh0209#p/u/3/bgRo8NnnQDw

 

[fishy_frontier]

Looking good:victory: I really like the placement of the rock lights.

 

[biglos454]

i love your set up! looks great. where did you get those rock lights?

 

[penski61]

they are just led licence plates lights from autozone

i was using one for my licence plate but got pulled over by a bored dps officer and said the lights were too bright and i got a repair ticket for it
so rather than wasting it i bought 2 more and used them as rock lights lol

 

[biglos454]

lol well at least you didnt let them go to waste. they seem to work very well as rock lights. very bright.

thanks for the info

 

[RonapRhys]

Watched the videos - that's amazing what you can do with that truck. Great job all around.

 

[penski61]

goin with a 9" for the rear so i can better match the front gear plus the yota housing is rusted inside
picked up a full width housing for $32 from a JY
got all the brackets cut off and down to bare tubes
then made a rear brace and skid, reason i made it this way is because im still using leaf springs

then cleaned the axle up better today , plated the bottom of the axle with 1/4" and added a rear skid

 

[AZ-Ted]

Wow!!! Looking good Aaron!!!