Hi. Many of you were making great posts in the original thread, but there were a couple people making many off-topic posts and flames in the original thread until it was ruined. So I deleted the original thread. I am remaking the thread as a poll. Please vote for 1 to 3 Trxus MT sizes you want. This will make efficient way for Interco to review results of poll.
I will submit poll results and on-topic posts to Interco. I will not comment on voters/posters size choices. Vote or post for whichever sizes you want, as long as it's based on an existing mold section width. Please see blue text below.
=====
Anyone who did not see the prior thread and is not familiar with this topic, please read topic introduction and explanation below, and then vote in the poll.
Anyone who is already familiar with this topic from prior thread may skip the topic introduction/explanation below, and go vote in the poll.
=====
Hi, I'm CB3. I am not an Interco employee. I'm a 4x4 owner who likes Trxus MT. I find them good on all terrains on and off road, including winter roads and daily driving on road. I think they'd be even better for all purpose and DD if there was a good selection of tall skinny and tall medium width sizes.
If you feel the same, please vote for 3 sizes you'd like to have. Your votes will make the new sizes (that are voted for) possible to get made.
If there is sufficient interest, Interco might make the most popularly requested sizes.
I talked with a senior Interco employee about this. He suggested I make a thread about it at whatever forum I belong to. He told me to contact him after the thread is finished, and he will review it. If there is sufficient interest, he will submit it to Interco management for consideration, and the most popularly requested sizes will have a good chance of getting made.
He said new sizes have to be based on existing molds. i.e. - new heights must based on existing widths.
The existing molds can make 10.1, 10.5, 10.8, and 11.2 section width tires.. Those are the section widths we have to choose from in whatever heights we want, within the limitations of how tall a radial tire sidewall can be relative to section width and still corner acceptably on road (for the given rim height and load rating). Using this information, I have compiled a list of likely size choices.
Please vote for 3 sizes you want. If you do not see the size you want listed in the polling area above, please post a request. I will submit poll results and on-topic posts to Interco.
It's up to you which new sizes get made. The sizes with most votes/posts will be most likely to be made.
=====
Note: Interco is currently in the process of resuming production of all Trxus MT sizes they made before. Those sizes will soon be plentiful and available in tire stores again. Interco is also willing to consider making popularly requested new sizes based on your votes and posts in this thread.
=====
P.S. - I omitted the following sizes from the poll because these sizes are already made:
31 X 10.5 R15C already made (though it's specs are 31 X 10.8 R15)
32 X 10.5 R16 already made (265/75R16D)
33 X 10.1 R16 already made (255/85R16D)
=====
I plan to submit the poll and on-topic posts to Interco at beginning of February 2011. Your votes and posts might help you get the size(s) you want, and might help the rest of us get the sizes we want.
Thank you for your time, CB3
I will submit poll results and on-topic posts to Interco. I will not comment on voters/posters size choices. Vote or post for whichever sizes you want, as long as it's based on an existing mold section width. Please see blue text below.
=====
Anyone who did not see the prior thread and is not familiar with this topic, please read topic introduction and explanation below, and then vote in the poll.
Anyone who is already familiar with this topic from prior thread may skip the topic introduction/explanation below, and go vote in the poll.
=====
Hi, I'm CB3. I am not an Interco employee. I'm a 4x4 owner who likes Trxus MT. I find them good on all terrains on and off road, including winter roads and daily driving on road. I think they'd be even better for all purpose and DD if there was a good selection of tall skinny and tall medium width sizes.
If you feel the same, please vote for 3 sizes you'd like to have. Your votes will make the new sizes (that are voted for) possible to get made.
If there is sufficient interest, Interco might make the most popularly requested sizes.
I talked with a senior Interco employee about this. He suggested I make a thread about it at whatever forum I belong to. He told me to contact him after the thread is finished, and he will review it. If there is sufficient interest, he will submit it to Interco management for consideration, and the most popularly requested sizes will have a good chance of getting made.
He said new sizes have to be based on existing molds. i.e. - new heights must based on existing widths.
The existing molds can make 10.1, 10.5, 10.8, and 11.2 section width tires.. Those are the section widths we have to choose from in whatever heights we want, within the limitations of how tall a radial tire sidewall can be relative to section width and still corner acceptably on road (for the given rim height and load rating). Using this information, I have compiled a list of likely size choices.
Please vote for 3 sizes you want. If you do not see the size you want listed in the polling area above, please post a request. I will submit poll results and on-topic posts to Interco.
It's up to you which new sizes get made. The sizes with most votes/posts will be most likely to be made.
=====
Note: Interco is currently in the process of resuming production of all Trxus MT sizes they made before. Those sizes will soon be plentiful and available in tire stores again. Interco is also willing to consider making popularly requested new sizes based on your votes and posts in this thread.
=====
P.S. - I omitted the following sizes from the poll because these sizes are already made:
31 X 10.5 R15C already made (though it's specs are 31 X 10.8 R15)
32 X 10.5 R16 already made (265/75R16D)
33 X 10.1 R16 already made (255/85R16D)
=====
I plan to submit the poll and on-topic posts to Interco at beginning of February 2011. Your votes and posts might help you get the size(s) you want, and might help the rest of us get the sizes we want.
Thank you for your time, CB3
Attachments
-
131_0910_18_z+4x4_mud_tires_test+interco_trxus_radial_mt.jpg98.1 KB · Views: 14
-
images.jpeg10.3 KB · Views: 8
-
IMG_3445-1024x768.jpg161.1 KB · Views: 9
-
mn6f1lxdq0stqj_sm.jpg13.3 KB · Views: 4
-
TrXus.jpg48.2 KB · Views: 8
-
TRXUS1.jpg18.4 KB · Views: 4
-
TrxusMT.jpg128.1 KB · Views: 7
-
trxus_mt.jpg64.6 KB · Views: 6
Last edited: