Propex 2211 Reset

[Mark2457]

Hi All

Just about to order a propex and considering the 2211 vs 2000, because I can mount on it's side, I also may install externally.

I know that there is a reset procedure on the 2000 that requires access to the circuit board. Is the same true with the 2211?

Thanks

Mark

 

[glennm01]

I used to have a 2211, and the reset procedure required turning the fan on, off, and back on again within a couple of seconds. Or maybe it was off, on, and off again. I forget. Regardless, no need to access the circuit board on the 2211.

 

[Blowby]

I have the 2211 and am able to reset through the controller.

 

[NOPEC]

I used to have a 2211, and the reset procedure required turning the fan on, off, and back on again within a couple of seconds. Or maybe it was off, on, and off again. I forget. Regardless, no need to access the circuit board on the 2211.

Same procedure exactly for a 2000. I have a newer one (post 2018). On the wall controller, start on the fan setting and go to "On,Off,On". Works perfectly.

 

[Mark2457]

Thanks all