jeep-N-montero
Expedition Leader
If you were to actually read up on the OME springs you will learn that Sierra was correct, the springs do only lift it less than an inch, but it will handle better and not sag when you add weight in the back.
Rocky Road Outfitters - How long did you wait for your shipment?
- Thread starter raysobi
- Start date
If you were to actually read up on the OME springs you will learn that Sierra was correct, the springs do only lift it less than an inch, but it will handle better and not sag when you add weight in the back.
JohnnyBfromPeoria
I'm Getting Around To It
Buy THESE. They are made of a substance that fell to Earth from outer space (or something). They are the strongest sliders I've seen and while I've been able to scratch them, mine have no dents. They destroy rocks. Get the little triangle reinforcement things for where the tubes weld to the frame, too. Just make sure Toasty doesn't weld one side on a little further back where it'll rub on the rear tire when articulating (just funnin' ya bud).
John B.
JohnnyBfromPeoria
I'm Getting Around To It
Has anybody attempted to modify Trail Gear's 58" kit for use on a SWB? We just measured and with about an inch cut off either end, they just might work.
John B.
John B.
plh
Explorer
You will never get more lift in the front than cranking (or indexing) the torsion bars. It is a limit of the geometry of the suspension. You may get more load carrying capacity at a given torsion bar height setting and potentially a better ride.
Toasty
Looking for that thing i just had in my hand...
I heard a rumor some cool dudes have some lift springs coming out really soon, tested and proven already. I also heard the springs are made here the USA, I think these dudes are in southwest somewhere. I don't know for sure because I'm not on face book.
howirolla
Campfire Passport
i think some of us will be needing more info on these, and by some of us I mean me.
haolepinoy
Incomplete Idiot
Adventure Driven Design
howirolla
Campfire Passport
I was mainly speaking to what the details/time frame on them was
jeep-N-montero
Expedition Leader
ADD, just makes sense on so many levels!
haolepinoy
Incomplete Idiot
They're easy to find on Facebook or Google and very responsive to questions. Regarding the Gen3 they told me in a recent email that skids and sliders were on the way:
John,
Thanks for the support! it's appreciated. The Gen 3 parts are slowly working their way through R&D, I'm pleased to say that the Gen 3 skid designs should be finished at the end of this week and as for sliders, we're hoping to have those and gen 2's ready the first week of January. They will be available without limited runs, so you'll be able to purchase them whenever you're ready.
Regards,
Joshua Mead
Adventure Driven Design
Mesa AZ 85206
Tel: 269.357.4372
www.AdventureDrivenDesign.com
AdvDrvnSales@gmail.com
Toasty
Looking for that thing i just had in my hand...
'round n' back again
Explorer
thats ok by we. ......expected from ADD syndrome