Show us your Toyota 4runner, tacoma or truck.

[Stealth 4x4]

Nice runner!

 

[xcmountain80]

98 4Runner

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]




Jacque

SO whats the project aspect of this vehicle kinda looks near complete. Or did you buy it like this and are swapping stuff out?

Aaron

 

[xcmountain80]

 

[TRDPARTS4U]

The 4runner came with:

Rockware bumpers, sliders
rear air locker , hooked up to CO2
OME suspension
a/p 265/75/ 16 in tires

I have swapped the suspension using

Toytec coilovers
LC rear springs
Bilstien shocks
SONORAN STEEL links and panhard.

Added the winch and lights
Baja Rack
255/85/16 Bighorns on 16x7 steel wheels
Budbuilt front and belly skids

Things that are in the works are:

1" body lift
4:88 gears
front air locker
mini compressor for lockers
the rest...

 

[xcmountain80]

Sweet. How are you liking the 255's? I'm oh so curious to get a set but don't want to hate them.

Aaron

 

[TRDPARTS4U]

Sweet. How are you liking the 255's? I'm oh so curious to get a set but don't want to hate them.

Aaron

That is my favorite size tire, I run the same size on my 06 Tacoma as well and I am very happy with them. I have always been a fan of tall skinny tires, I ran 33x10.50s on my 96 Tacoma that I just sold.

Jacque

 

[Fourunnerguy]

My first post here:

Just starting out, I have a lot of plans for her:

 

[Overland Hadley]

Welcome to ExPo Fourrunnerguy!

 

[corax]

Corax's '88 4runner

I'm not sure if I ever posted pics up and it's been awhile since I was over here . . .

Aug '08 Big Bear, CA (Dishpan Springs)

Sept '08 Yosemite CA

Oct '09 Crater Lake, OR - on my way back to PA the long way

Jan '09 TTORA @ Rausch Creek Offroad Park, PA

1988 4Runner

3.0L 7MGE Supra engine swap
recent Port & Polish on the cyl head with ARP head studs used on reassembly
MSD 6A Ignition and MSD 8mm wires
2.5" mandrel bent exhaust
stainless Flowmaster Delta 50 muffler
home-fab front bumper
home-fab rear bumper with receiver
home-fab lower control arm brace
home-fab extended rear shackles
home-fab idler arm brace
Toyota LSD front differential swap from an '83 Celica Supra
4.56:1 V6 center sections front and rear w/ 32x11.5x15 BFG A/T KO tires on alloy rims
Marlin HD W56 trans
Hannemann front fenders
"Turbo Coupe" hood vents
110,000 candlepower driving lights (aircraft spot beams)
rear driving lights wired for use as reverse lights
SR5 gauge cluster (tach, oil press, voltage), added engine vacuum gauge
Cherokee CM-10+ CB peaked (10w), tuned, and able to transmit on 10M, 11M, 12M bands (CB is 26.965 MHz -> 27.405 MHz, I have 23.815 MHz -> 30.555 MHz)
Yaesu FT-2800 2meter 65W Ham radio (135MHz - 173MHz)
'89 Celica All-Trac Turbo seats
built stout to be able to drive to the trail make it home every time

My Garage Thread

*near future mods
-just got a set of OME Dakar rear leafs with a Marlin Crawler U-Bolt flip kit
-T-100 caliper and rotor brake upgrade (just need to install), got the 1-1/16" master cylinder installed last weekend
-upgraded headlight harness (already built with dual relays, but not installed yet)
*not so near future mods (> 3 months)
-modify rear bumper for fold down tire carrier
-NWMP 14 gallon aux fuel tank (already have the tank, but need to move the spare first)

 

[kcowyo]

1988 4Runner

3.0L 7MGE Supra engine swap
recent Port & Polish on the cyl head with ARP head studs used on reassembly
MSD 6A Ignition and MSD 8mm wires
2.5" mandrel bent exhaust
stainless Flowmaster Delta 50 muffler
home-fab front bumper
home-fab rear bumper with receiver
home-fab lower control arm brace
home-fab extended rear shackles
home-fab idler arm brace
Toyota LSD front differential swap from an '83 Celica Supra
4.56:1 V6 center sections front and rear w/ 32x11.5x15 BFG A/T KO tires on alloy rims
Marlin HD W56 trans
Hannemann front fenders
"Turbo Coupe" hood vents
110,000 candlepower driving lights (aircraft spot beams)
rear driving lights wired for use as reverse lights
SR5 gauge cluster (tach, oil press, voltage), added engine vacuum gauge
Cherokee CM-10+ CB peaked (10w), tuned, and able to transmit on 10M, 11M, 12M bands (CB is 26.965 MHz -> 27.405 MHz, I have 23.815 MHz -> 30.555 MHz)
Yaesu FT-2800 2meter 65W Ham radio (135MHz - 173MHz)
'89 Celica All-Trac Turbo seats
built stout to be able to drive to the trail make it home every time

My Garage Thread

That's a really impressive turbo 4Runner and a well detailed build thread. I bet it's a blast to drive. Looks great too, well done.
.

 

[01tundra]

Here's my 2001 Tundra -

I'm currently equipping it to be more expedition friendly (ie. just added a set of Lightforce 170 lights and in the very near future looking to add an ARB fridge, Luna wiring kit for my dual batteries, and an additional storage rack in the bed above the spare tire). Our last trip was on the Peterson's Ultimate Adventure, we put 4,830 miles on it over 10 days. We have also driven it through 22 states over the past 3 years and on some of the country's toughest trails. We are heading out for Moab on April 17th for our next adventure. I designed the interior to be able to hold all of our camping gear, tools, & welder - the bed is currently for the spare tire, 2nd battery, spare parts, secondary cooler, fuel, jack, etc. This is also my daily driver.

 

[xcmountain80]

That look like a rig I saw in 4wdtoyota owner yes,, no?

Aaron

 

[climber-420]

Not much,but it works

Going to get Sliders up the road from Bud next week. Can't wait. Any ideas for the chrome guard? I want to spray it down with some plasti-dip.lol

 

[Rattler]

Here's my 2001 Tundra -

I'm currently equipping it to be more expedition friendly (ie. just added a set of Lightforce 170 lights and in the very near future looking to add an ARB fridge, Luna wiring kit for my dual batteries, and an additional storage rack in the bed above the spare tire). Our last trip was on the Peterson's Ultimate Adventure, we put 4,830 miles on it over 10 days. We have also driven it through 22 states over the past 3 years and on some of the country's toughest trails. We are heading out for Moab on April 17th for our next adventure. I designed the interior to be able to hold all of our camping gear, tools, & welder - the bed is currently for the spare tire, 2nd battery, spare parts, secondary cooler, fuel, jack, etc. This is also my daily driver.

Sweet rig!!

 

[01tundra]

That look like a rig I saw in 4wdtoyota owner yes,, no?

Aaron

Yeah, it was in the 2007 July/August issue.....lot's of changes since then :sombrero:!