TrekboxX drawer system for JK idea thread
- Thread starter TrekboxX
- Start date
TrekboxX
Supporting Sponsor - TrekboxX
Thanks for the congrats. I don't think it's a stretch at all, I'm simply comparing Trekboxx products to the other options available to the buyer. Isn't that what a buyer is going to do?
Don't get me wrong, I like (some) ARB products. But when I was outfitting my rig I looked at their systems, and others. They work just fine, for the most part. But for me the quality and features weren't there, so I built my own. One thing led to another, and here I am.
Here is a message from one of my customers: "There was someone next to us with an ARB system. The difference was painfully obvious. Makes the ARB look like a toy."
So, comparing my company size to ARB, yeah, a total joke. But comparing my quality to theirs- I fare just fine.
Back to our regular scheduled programming. What is your ideal setup?
Maxcustody
Explorer
I looked at your product the other day stumbling across it on this site......I am new here. I will say I am impressed. I own a 2014 Jeep 4 door and looking forward to seeing one of your products for us Jeep guys!!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
toxicity_27
Adventurer
Any update on these?
TrekboxX
Supporting Sponsor - TrekboxX
Hey folks- sorry it's been quiet for a while. It's been busy over here moving and getting ready for a new baby. I've been finishing up a prototype system for a friend with an Xterra, which has been a great exercise in weight and space saving measures that I can transfer over to the Jeep designs. Even though the Xterra is much smaller in cargo room, there is almost as much lateral space as the Land Cruiser design due to these new features! Also, the system so far is LIGHT. One of the big advantages of the Xterra (and Jeep) designs is that the mounting locations for the system are along the outboard edges of the system, thus allowing the bottom of the "box" to be essentially a skeleton. This alone saves a ton of weight. The back of the system is also skeletonized. I made almost the entire system from 12mm baltic birch as opposed to 18mm, which saves a lot more. It's also plenty strong given the shorter spans in the system. The hurdle I have with the 12mm is designing for knock-down fasteners to work with the limited material width, but I think we can get there. I have a 2 door I've been measuring, and am still looking for a local 4 door. That's where we're at!
TrekboxX
Supporting Sponsor - TrekboxX
Hey all. Another apology- we are moved in to the new place and have been busy setting up shop. My CNC manufacturer is also relocating to a new shop, so there's been a bit of a pause over here. He should be up and running by Feb at the latest. I have a local 4 door to work on, as well as a 2 door.
I'm still interested in some more thoughts on your ideal setup!
I'm still interested in some more thoughts on your ideal setup!
Yuman Desert Rat
Expedition Leader
Have you explored lighter materials such as fiberthane? AT uses it on some of their drawers. Its expensive but extremely light and strong. Love your work!
TrekboxX
Supporting Sponsor - TrekboxX
Yes, it's happening. Question for you guys- the "hollow" in the tailgate- is it deep enough for your average add-on? Such as a fold down table, etc? So, if the drawer system went all the way out to the bump out near the latch, would that be enough clearance for whatever you want to attach to the inside of the gate?
pdxfrogdog
Adventurer
I run a JK Tailgater which does not stick out past the widest part of the tailgate (at the locking/release mechanism). I would think folks asking for more clearance are probably running molle bags attached to the bottom of their table. For me, I would prefer to maximize drawer volume rather than making room for a few cordura pouches. YMMV.
Sorry for the crap photo, sun not cooperating... but since this is March in Oregon, I'm not going to complain much!
JK Tailgater by pdxfrogdog, on Flickr
TrekboxX
Supporting Sponsor - TrekboxX
Thanks, great info. I would agree on maximizing drawer volume (if I had a jeep, of course!). It's impossible to please everyone, but I'm leaning that direction, for sure. Seems to me if there are some options on the market that fit, then that should be the route to take. As it is the drawer depth is a challenge to fit popular fridges on top- we need all the space we can get!