What did you do to your Mitsubishi today?

[Marutuk]

Attended the 2015 Mitsubishi Owners Day.

 

[plh]

View attachment 294322attended the 2015 Mitsubishi Owners Day.

Looks like I have a larger turn out than MOD in my driveway!

 

[plh]

Finally replaced the rear subwoofer in the 2005 and jumpered the terminals where I pulled the accessory power relay so the sockets in the cubby and very rear are always "on"

 

[Marutuk]

There were two more gen 3's (2004 or newer), but there wasn't any space on the main parking lot anymore when they showed up. There was also one gen 3 that belonged to an employee.

 

[JBThompson]

This afternoon I'm replacing some brake lines. I had a line let go on me Saturday so it's a good time to replace all the rusty stuff.

 

[bikerjosh]

Cut a relief in my re-enforced mid skid plate to clear front diff cover. Still hanging up on something??? My HF angle grinder has pretty much ************************ after 4 years. Not a bad run for <$20.:sombrero:

 

[nckwltn]

Finally replaced the rear subwoofer in the 2005 and jumpered the terminals where I pulled the accessory power relay so the sockets in the cubby and very rear are always "on"

This sounds like a nice mod... Wonder if it works for 2.5 gen

 

[Sabre]

Cut a relief in my re-enforced mid skid plate to clear front diff cover. Still hanging up on something??? My HF angle grinder has pretty much ************************ after 4 years. Not a bad run for <$20.:sombrero:

Welded up and installed mounting brackets on the front cross member for the skid plate I'm building. Did the front one (engine) last year; this one covers the transmission. Sourced a sweet piece of aluminum plate for it at the metal recycling place this afternoon. Cut out the five overbuilt and way too heavy crossbars in the roof rack I made last year and welded in 3/4" conduit in their place, saving a bunch of weight. Finished just as my gas bottle was hitting the bottom of the gauge...perfect timing.

 

[Marutuk]

Ordered a snorkel for my Gen 3

 

[kevinreeves116]

Ordered Monstaliner for my 1991


Sent from my iPad using Tapatalk

 

[FullMonte]

There were two more gen 3's (2004 or newer), but there wasn't any space on the main parking lot anymore when they showed up. There was also one gen 3 that belonged to an employee.

I always wondered if they had any vendors out there for Montys.. Did you feel like going there was a complete waste?

 

[BOPOH]

I changed gear oil in front and rear diffs of the montero, engine oil in lancer, shopped for fuel pump for montero sport($260 and up)

 

[kbahus]

Wired in my latest Clist find, just need to figure out how to secure it and where. This model has no tie down points which is kind of a bigger issue than I anticipated, but I can't really complain.

 

[BOPOH]

Wired in my latest Clist find, just need to figure out how to secure it and where. This model has no tie down points which is kind of a bigger issue than I anticipated, but I can't really complain.

Just bolt down L brackets, or heavy duty Velcro

 

[bikerjosh]

Finished painting my re-enforced skids. Just waiting for the paint to cure before bolting them up.