wiring lights on the front of my roof rack
- Thread starter dino2000
- Start date
sydneyman
Observer
ive got a safari rack on my p38 and have wondered the same thing in case i ever pull the trigger on some lights... my plan was to run them along the bottom on the driver's side to the rear hatch and just have them enter either through the weather proofing or just between the weatherproofing and hatch...
sydneyman
Observer
try to go wih the flow and not against it?
can you mask the wire or make it look good?
probably not! lol. my thought was just zip tie to the rack in some black plastic wire loom... i wouldn't want anything too permanent in case i needed to track down a fault or remove the rack...
Adventure Copan
Adventurer
In the coming months we are going to do our lights and here's a few ideas we came across.
Wrap them in this and it can be found here: http://www.grainger.com/Grainger/ww...ire+sleeving&N=0&GlobalSearch=true&sst=subset
Then we are considering going through the roof with the waterproof guys. They can also be found at the same site.
Hope that helps.
-Daniel Kent
Wrap them in this and it can be found here: http://www.grainger.com/Grainger/ww...ire+sleeving&N=0&GlobalSearch=true&sst=subset
Then we are considering going through the roof with the waterproof guys. They can also be found at the same site.
Hope that helps.
-Daniel Kent
Adventure Copan
Adventurer
Do y'all mean running the behind the rigs snorkel or is there a wire snorkel?
-Daniel Kent
achampagne
Explorer
When I did my Disco lights, I ran them inside a plastic loom, and down the passenger side A-pillar to the cowl.
Like This: (sorry this is the best pic I have)
Like This: (sorry this is the best pic I have)
jh.
ambitiose sed ineptum
I think they mean exactly what Champagne did above, although hiding what he did behind a snorkel...