Search results

I did this modification this weekend to my LR4, initially I placed two lines in the incorrect place on the rear valve block and got a suspension fault. A quick search in TOPIX and I was back running again. Here is the illustration showing proper routing of air lines for anyone that is going to...

Great thread, trying to figure everything out now that we have a 6 mo old and large dog. Have you noticed any issues with the shark fin antenna and satellite radio since installing flooring?

Most likely blower motor, it's in passenger footwell area, IIRC it was a common issue on LR3, I had mine replaced under warranty.

Heater location DIY Over the weekend I completed the passenger side rear heater line relocation. I am running 285/65/18 which is an almost 33" tire. This was a pretty simple process and I can state the heater works and there is no leaking. Below are the photos and the steps I took to relocate...

Where is the main box from? Or did you fabricate it?

What are you doing for security on this setup? I'm thinking of doing something similar...

I had the driver front go out at 63k on my LR3, never wheeled it hard but it did plenty of miles on washboards, dealer stated they see it pretty regularly.

What are the brass fittings between the schrader valve and the 3 way? I simply ordered 1/8" schrader valves and assumed they would just thread in...? Am I crazy or is there something extra I need to buy past the three way, push fittings, schrader valves and air line? JAK, thanks for answering...

Thanks for all the help DiscoNels and Zelatore! Thanks for the advice, I might try fully replacing the aluminum, we'll see how much coolant I feel like dealing with... In terms of tire I chose the nitto trail grappler, it's an e sidewall and you can tell as soon as you pick them up, wheel /...

I spent quite a bit of time searching the all the online LR resources I could and could not find one. If anybody has any big tips please chime in.

Thanks! Looks like I might get the opportunity to modify it without a DIY.

I have used the search function to no avail and only seen mention of relocation of the rear ac lines in the passenger rear wheel well on the LR3/4 relocation. Is there a DIY guide somewhere for this? I know where the lines are but have not pulled the fender liner yet and am trying to get an...

What size is the tubing? Assuming 1/4"?