Search results

Arlo, in North America trailer brakes are typically electric brakes that are powered using a brake controller in the tow vehicle. The system is energized through the brake light circuit and the power to the brakes set through the controller. Some brake controllers have momentum sensors that...

The trailer looks to be in good condition, and the price is very reasonable. I'd be worried by the "rebuild title". The trailer must have been registered before. Unless you can prove ownership getting title might be a big problem for you.

I would recommend you realign to get the steering wheel centered. If it's off center it can cause fault codes and erratic behavior. The Electronic Stability Control will think you are in a slide and activate the Brake Assist Control system.

Did you also buy the geometry correction brackets? If not I'd recommend you do. Makes a big difference to handling. We have nothing but good things to say about this lift. Improves the ride and handling dramatically over stock. The AEV instructions are very detailed and accurate. Using a lift...

Sorry that was all we had in stock.

Sorry, try this link

Strange?? e-mail me with your shipping details and I'll run an estimate for you

I'm enjoying this thread. I believe size does matter, and when it comes to diesels smaller is better. Americans are obsessed with large engines and excessive power output. We need to take a closer look at the smaller, economical, diesels they are running in Europe and learn something. This...

It's time for AT's annual stock taking, unfortunately we get taxed on the inventory we have in stock at the end of the year and we need to do something about that. In order not to pay the tax we need to sell the product prior to January 1st 2013. That way we'll be passing the benefits along to...

Paul May from Equipt1 is the importer of National Luna products into the USA. Visit his website at www.equipt1.com and get his number from the contact page. He will be able to give you advice on the NL system.

Looked at Anderson plug covers last year at SEMA and had a sample sent to me. The unit I was sent wasn't compatible with Anderson connectors available in the USA. They may have developed new covers since then. The US distributor was based in Reno NV, just down the road from you. Can't remember...

Ask the KTM dealer if you need to re-jet for elevation. When I ran Weber carbs I had to re-jet for the elevation in Truckee.

It's a shame you didn't spend your time and talents making a new and improved coupler. What we have now is a copy cat coupler with no rating or certification. What a time suck for everyone.

Torsion axles can come with the arm in several different positions, the arm up, the arm straight, the arm dropped, I presume you have drop arms on your trailer. Most of the arms are fixed in this position, but a few manufacturers make axles where the arms are adjustable on the axle. If you...

I spoke to the people who sprayed the JK in the bedliner made from recycled tires. Don't know how much 5 gallons of this product weighs, but they said it took 3.5 gallons to spray it.

Robert, balancing a trailer is an important consideration to take into account, and the placement of batteries, fuel cans, water tanks, fridges and other heavy items need to be planned out. As the axle is the trailers balance point heavy items placed above it can be perfectly balanced, but it's...

The 6 on 4.5 hub are not available. You can get 6 on 5.5 to 6 on 4.5 adapters made. To match the wheel studs you will need 12mm x 1.25 studs pressed in. Let me know, e mail is best, if you need AT to get a set for you.

I think it's fair to say that the most difficult factor when hitching any trailer up is the alignment between the vehicle and the trailer. Back up cameras work very well, they also sell alignment guides, and of course if you can see the trailer in the rear view mirror you can align it that way...

Bob I think you need to look at this video, your time scales seem to be inaccurate.

Wade, remember that the tent and awning side of this project are conducted by Nemo Equipment. We are happy to pass along suggestions and ideas, but we don't design or manufacture the end product.