Search results

oh 38 gallons!

It's not for a Sport. Does your 94 have an airbag? Order it here http://www.4wheelparts.com/Bull-Bar-Winch-Mount-Bumper.aspx?t_pn=ARB3434020#ctl00_ContentPlaceHolder1_pDetail_productSpecs

Look at setting your ride height. Most likely your front torsion bars have sagged over the years - normal. You can either do it yourself or take it to a REAL alignment shop. (not like a Walmart or even Goodyear in some instances these places on 4X4s alignment = set toe - PMO) and ya got to...

Take a look at the Stanley Vidmar Industrial tool box construction for some ideas.

Amazon

I have one, but its been around a while

Rear bumper is going to be difficult unless custom fabricated. Front bumper - ARB? I looked at the google **** results j-N-m posted - looks like some nearby options for you.

second part. yes

nearly 25 yrs for me. I'd keep the truck. Happy husband is happy wife... brainwashing works. the '05 is hers ;-)

Not 100% positive, but I think GM and Isuzu are still partnered. Previous generation of Chevy Colorado (not current) and next generation, Dura-Max diesels, Mid size trucks.

What year truck are you referencing? I've had a wide variety of tires on my '88 over the years - up to the current 33 x 12.5 MTZs. I think that 33x10.5s on Gen 2 trucks are really good, and really don't need a lift to run them (maybe a little torsion bar tweek to set ride height level front to...

You like this? This is my '92. FJ Cruiser 17" steelies LT265/70R17 Falken Wild Peak

I've got 235/85R16s on my Gen 3 - don't think I'd repeat. Wish I could find 255/85R16 in an AT - I think that would be great. Maybe will look at Ko2 34x10.5R17 next. I have both 16" and 17" wheels for this truck.

I've done both Gen 1 and Gen 2 a few times. You will pretty much need to pull the driver side CV shaft out (separate ball joint(s)) Passenger side CV bolts to the jack shaft so you can unbolt there w/o un-doing ball joints.

My wife and I drive BFG AT KOs every day. 88 Raider: 4D56T, 5 spd, 4.62 LSD F & R, KYB G/A, T/L, OME Dakar Rear Springs, 33x12.5x15 MTZ, PLH Lock Outs, Justice Bumper #2, Dual Bouncies, 92 Montero RS M/T (V5MT1) 3.0 V6 LT265/70R17 Wild Peak, KYB G/A, ARB Bumper, Warn 9k, 4.636 LSD F & Locker...

BFG T/A KO2 A/T - depends on size. 33x10.5x15 will set you back about $625 from Tire Rack after Rebate plus shipping / installation / balance / alignment - figure $900 +/- 15%

$300 to $600

The foam inside the lower cushion on the manual seats Gen 2 are the same from drivers vs. passenger. I did a swap from a couple salvaged passenger side foams and put in driver sides when I did the seat re-upholstry in both the '92 & '93. Donors were a '97 & '99 IIRC. As far as the heat goes...

Case in point: http://milwaukee.craigslist.org/cto/5230786770.html local - but not mine

camper case. I like it. $3k http://store.wildboarproducts.com/Camper-Case_p_27.html