Search results

I have this pump (or one that looks EXACTLY like it).... works really great for my 5x/year.

what assortment of parts did you order?

So... that's all it takes!?! I did do a transmission fluid swap a few months back, and that seems to have fixed it by 75%, but there is still a little rumble. How much work was it to change out the bushings?

Correct.... And sorry also, I have an ultragauge and not scangauge, but the same kind of thing happens if I just plug it in without starting the car. In theory, if the 94 has the same computer as a 97, it should work. I think it was 97 (or 96) that obd2 became mandatory in the US.

Spent 10 years in the Dayton area, I forget that south eastern Ohio is much different than the west side of the state. Much more interesting trails!

I'm guessing you've started the car while it's plugged in? I get the same type of message in my '99 if I don't start the car after plugging in. It will sit on that message over night if I don't start the car.

if you were like me, try this link: https://en.wikipedia.org/wiki/Clockspring A good example of a name that doesn't really describe what it does.

you can also use some wood blocking between the jack and the car to get a little more height out of the lift on the jack.... assuming the jack isn't broken and you're not over the weight rating on the jack

awesome!

this is how I got these two to fit in. All of the others fit with just a little bending, these required a special touch.

I took it in for an alignment and asked them to align it with the steering wheel set straight. One of the problems I had was that the new pitman arm didn't go onto the shaft as far as the old one, which pushed the alignment out a little.

I think the first post contains an error. it calls for "Type DE3032 (DE3175) -- Qty: 7", but I should it be DE3022? a few posts down, it does reference DE3022. googling DE3032 brings back nothing LED related, DE3022 is chalked full of interior light related stuff

Yep... I have that same problem... Its actually pretty easy to live with [emoji2]

This sounds like a nice mod... Wonder if it works for 2.5 gen

open the door full, there should be a flat metal bar along the bottom corner under the hinges that connects between body and the door. when the door is pushed open wide, push the flat metal lip toward the corner a little, and it will catch. To close door, push door and pull metal lip.

same story from my smog guy.... Thankfully I just did smog this year, so I'm good for a couple more years!

I did plasti-dip on mine.... it's holding up "ok".... too bad that color combo wasn't a factory option, it looks way better than the light gray as stock

did you paint the lower trim or is that the way it came?

What seat covers did you install? My driver's seat is starting to get worn through.

I tried to look at where the switches might be. Are they on top of the tranny? Because I couldn't seem to find them in any obvious reachable places... My 03 gets flashing center light after about 20 mins on the freeway. Shut the car off, turn back on and the center won't flash for another 20...