Search results

Started building doors for the cabinets today:

Today we put in the cabinet: This is going to be the wardrobe: Lil Teaser:

Went to the scales today cause i needed a dry weight for my new registration as a rv. Really happy with the weight. Got all the desired paperwork: Also got the net spare tire and rim: Then we started building the next cabinet: Did also some more insulation:

Thanks java, that's an awesome idea. :victory: The door will open, but only 180degrees and not 270, which doesn't matter cause the tire would hit the sidewall either ways.

Thanks. Got an example picture? Never heard of that.

It`s a Waeco CD30. I figured that out too, should be able to fix it pretty easy. Built the spare tire carrier today: Of course there was not a single pice of tubing the right size in my 15tons of steel. So i had to turn some down: Had to weld the plate to a fixture to turn the...

Put in the valve: All the other stuff in: Wired it: Almost finished: Then we started on the right side: And then dumb us killed the brand spanking new fridge. We didn`t notice that the copper line bent really hard and started leaking. I broke it off then to let the...

Thanks. The shower is not made out of particle board. Not sure right niw cause my dad bought it, but i think it`s mdf. But i recall he said it`s water resistant that`s why he chose it. I`ll ask him tomorrow. So i grabbed one of my oldest friends today, also a piece of aluminium: Well, that...

Thanks. Just sent the parts out for copper plating, no time to mess with it myself. I bought a y-connector for the airtronic hoses without a flap cause i thought i don`t need one. Well, turned out that i indeed need one, so i had to spend some time in the shop. Cause i wanted to get it done...

The cabinet will vent into the shower. The shower will have a roof vent. So i can use the shower also as a dryer cabinet when not in use. Made some parts that will be copper plated:

Put in some ducting for the airtronic: Then i made the dryer cabinet: There will be some led stripes for indirect lighting: Power panel: : And painted it:

Got the light mount back from powdercoating and mounted it: Then i started plumbing the shower:

Still in Mazedonia, but will be back soon...

I bought it off ebay. It`s rated for 600gph. The price was right and it seemed well build to me. Wouldn`t need it with a underfloor grey tank. I bought some push lock locks but didn`t like the feel of the cheap plastic knobs. So i turned some out of brass: Also took some vids...

Sorry. :sombrero: When will it be at your place? So we started with the shower today: While my father startet building the wood stuff i put in some wire tubes: And spray foam insulation: The lower part done: Then i wired in the bilge pump: Put some insulation on the wheel well...

Thanks, it`s really awesome, i like it a lot. Didn`t get much done today apart from cutting up some cardboard: Atleast we got a plan now. Well somehow...

Cut the back plate: Put the fabric back on : Placed some insulating tape over the insulation seams: Here`s how the couch goes in: In sleeping mode: I like it:

Yes. But the air heater will mostly be used to dry clothes and stuff, and to boost up temperature. Main heater will be the hydronic, feeding the hydronic floor heating and a small heat exchanger. Disassembled the couch today: Cut the rear: Fit`s like a glove: Cut it up front: This...

Yes it`s 10mm flat bar. It`s not overkill, otherwise it`d flex under the weight of the high beams. Remounted the Espar today: Also bolted down the floor:

Thanks guys. So i removed the front bumper and started measuring: Made some mounts: Mounted it: It`s a bit lower than i wanted it but the hood would hit the lights it it`be up higher.