Search results

Pics of?? go to the siet and you will get pics of the bumper https://tactical4x4.com/index.php/product/lr3-lr4-rear-bumper/ same as mine w/o cans

I secure mine to my roof rack. Made a simple sheet metal base that attaches to the tank with 'J' bolts cut from 'U' bolts (used to tighten cable) and then the tank base to the rr. The bolts remain in the rr and the base is attached with wing nuts over flat washers and lock washers. Has remained...

I was fortunate in that the T4 owner came to Denver and installed mine in my garage, so it was a professional install. It was to replace the existing T4 bumper, so no real difference was noted in the 'gaps'. Original install by I and my friends had the same clearances as now. I have about 1/4 to...

I use this setup as the hose bib can be removed if required and not really have much impact on the can lid.

Something is loose inside the mirror housing that rattles. Is there a video available the can demonstrate how to take the mirror apart to perhaps find and fix or tighten the mirror without destroying it? If not, a step by step direction to accomplish the fix would really help. edit: I did find...

The FR tanks are a reasonable choice if you never intend to lower the middle row of seats to install FR shelves or even to make your own system. I have decided to use 10L Scepter cans. Probably not the same capacity but I have 4 of them. The 20L are too heavy for me when full.

To me the big issue with an additional fuel storage area/tank is transfer of fuel. there are many ways to accomplish this without interconnection of the tanks as many of the later fuel systems are 'sealed'. One can incorporate a switched remote pump control to facilitate transfer. I removed my...

I watched the tire storage bag vid. Wouldn't have taken much time to tell the price. BAM ...and that is the reason I would not buy it, don't like secrets.

As a former PInz owner, always check it out if you don't know the PO. The 710K is a formidable vehicle and can surprise those that don't know about pinzies with the vehicle's capabilities. Without knowing the age, 23K does not sound out of reason if it has been taken care of. edit: Just checked...

https://www.equipt1.com/collections/hard-case-awnings Got one and it comes in a hard case, not likely to rip on branches.

Saw the pic, that is a rather large piece of gear for the top of an LR

Rather than using the Scepter cans on their sides or even sticking them on the RR vertical I made a fited base and purchased shorter (10 L) cans from a company in Kentucky in blue. I also acquired 10 L cans in the typical brown from REI, they are less expensive from here...

+ shipping, from where?

Is it repairable through the mfgr? Almost anything is replaceable or can be repaired through mfgr or at least get parts to do yourself.

You could depress the stove into the slider by using a router to form the sides after the hole is cut.

I'll tell you what I think. If it were closer to me I would get it

Dr Gil, Shade has beat me to an answer. I purchased that pump sprayer many years ago, replaced the wand with a push/pull spray head. Although the spray heads do not last forever they are easy to replace. I have since gotten a Waterport that I can secure to my Front Runner RR with a bracket that...

I used to use this. Can set it on the stove to heat water.

Molle panels are a bit pricey but peg board with footman loops pop riveted to them are not and you can place the loops anywhere.

Thanks for sharing your adventure. What is in the ABS tube on the side of the tent? We saw some similar 'ghosts' at a castle in Italy.