Search results

I just finished putting Rancho RS9000 XL shocks on the front of my 2013 FG140. It's Rancho part number RS999179. The upper mount is 9.74mm diameter vs stock at 10.36mm. The lower mount took a 16mm OD 12mm ID 32mm long sleeve. Pictures on my instagram if anyone's interested. They were just...

Fantastic!

I'm with you. Those tires are such a bear. I found this guy from Esco Equipment called a heavy duty wheel hand truck. It works great horizontally or as the picture shows, vertically :)

Why does this site often upload pics in the wrong orientation? Does anyone know? I see it and have experienced it often. This is one of the reasons I've posted more build pics on another format. This site can be a PITA to make it look good.

285/70/19.5 will fit on the front. See pic.

Fun times!

Rear shocks: Marked part number on shock is 527829 23" extended (584mm) 13 5/8" collapsed (346mm) Dual eyelet 21" static from eye bolt to eye bolt on truck

Rancho came back with this: "We do show a part number with such dimensions with s4 (3/8" stud upper mount) x l1 (5/8" eyelet lower mount) 13.38" compressed lenght x 21.88" extended lenght. Part number is 37024. " I couldn't find that part number under Rancho. It's a Monroe shock part I...

http://denver.craigslist.org/rvs/5660247540.html

A classic camper for sure... http://denver.craigslist.org/rvs/5660247540.html

My stock front shock measures 14.5" or 368mm collapsed and 21 5/8" or 549mm extended with a pin/eye configuration. The 2007 specified above is 311/473 pin/eye configuration so it would be too short. Options from the Rancho chart below don't seem to have the right ends. I'm also worried about...

Does anyone know if the 2007 and 2012 FG140's have the same shock part numbers? Would these work on a newer FG?

I put a set of those into my Jeep. Great seats for the price!

Reefer and pizza, what a combo :)

Walmart had checkpoints on their website sold individually for under a buck each for 41mm

Is this a MITSU kit or a generic kit and any idea of a part# / Manufacturer?

There is room in my 2013 behind the glove box for putting USB power, behind the passenger side access panel to mount an auxiliary fuse block to power these USB and room overhead for a lot of things... The aluminum is there because I can't measure right until after I cut :) Simple bracket...

I just had Stockton build me two 19.5" x 8.25" wheels copied from a set of 4 used Stockton's I'd purchased from an expo member. I went to Stockton Wheel and they measured the old wheels and duplicated it exactly. For future reference my SO number from Stockton Wheel was 5006 and my reference...

Those are 19.5's, reversible, and made from new parts by stockton. I had them build two wheels to match the four that I purchased from a expo member used. He put 30-40k miles on those Stockton wheels without issue. They completed the wheels in just under 4 weeks and with the SO number I list...

Take a peak at my instragram link below for Stockton wheel info and my SO number that they can copy from.