Search results

  1. crismateski

    What tire pressure on the low end with a full-sized truck?

    as stated, you just have to play with it, but i have an 06 Power Wagon with 305/70/17 Nitto Terragrapplers. I have had them down to 10, and the bead held. In actual use, I usually run them between 18-23 and have never had a problem
  2. crismateski

    HAM Operators- Post up here

    May I suggest the Outdoor Adventures USA net on Thursday nights. Keller peak repeater. If you want more info you can check out OAUSA.net or send me a PM. I am right next door in San Antonio Heights
  3. crismateski

    Overland Hammock Camping

    if hung properly, you can sleep in just about any position in a good hammock. I love my warbonet, it lives in the truck.
  4. crismateski

    Toys 4 Tots 2012 - Save the Date!!!

    hopefully you will get this before you leave. I will go to 146.550 when I get up there. I am hoping to just see some vehicles that I recognize. See you up there
  5. crismateski

    Toys 4 Tots 2012 - Save the Date!!!

    I am planning on heading up after work tomorrow. Hopefully up there by 6pm or so, anyone going to bu up there?
  6. crismateski

    COOL NEW PRODUCT - HAS ANYONE MOUNTED A CAB TOP (3rd light) LIGHT MOUNT ?

    Not sure what vehicle you have, but on the 3rd gen dodge, there is enough flex in the headliner that I was able to feed the wire for the lights and the firestick brand coax through the headliner (and remove the wires) with out removing the headliner, and the trim at the floor was only a couple...
  7. crismateski

    COOL NEW PRODUCT - HAS ANYONE MOUNTED A CAB TOP (3rd light) LIGHT MOUNT ?

    used the 8" (or so) of metal strain relief that comes on the lights to reach the cab. The bracket has notches that allow you to slip wire through it, and in the the brake light opening. I then went along the headliner, down the c pillar, under the carpet and through the firewall. The only...
  8. crismateski

    COOL NEW PRODUCT - HAS ANYONE MOUNTED A CAB TOP (3rd light) LIGHT MOUNT ?

    I was running pencil beams up front, so I had them aimed out pretty far. You did get a fair amount of spill through the moon roof when it was open, but it did not have a negative effect on the lights. I ran them through trees many times and never had a problem. Had them up there for about a...
  9. crismateski

    COOL NEW PRODUCT - HAS ANYONE MOUNTED A CAB TOP (3rd light) LIGHT MOUNT ?

    I had one on my dodge worked great I had 2 KC lights off the front and a firestick off the back I dont have any great photos of it on this computer, and have since taken it off to put on a camper shell If anyone wants one for a 3rd gen Dodge, I will part with it real cheap. It was heavier...
  10. crismateski

    SC to CA

    This site has all the info you need, maps, gps way points, a message board just for the trail http://www.mojave-road.com/ I would recommend getting the Mojave Road Guide by Dennis Casebier there is a link to it from the previous page, or you can find it on desert usa (lots of trip ideas) or...
  11. crismateski

    SC to CA

    looking at your map, I would say, ditch the 15fwy (vegas to barstow) and catch the Mojave trail, if you want info on stuff in the SoCal area, I can give you more details depending on what you want.
  12. crismateski

    Scepter and LCI Gas and Water cans SOLD Los Angeles

    Guess I am number 4 in line for the fuel cans
  13. crismateski

    norcold v-2000

    Let me check with my uncle, I bet he wants it
  14. crismateski

    Progression of a NEW Photographer (At least I hope to be)

    "soft" if referring to the focus. Look at the edges of your subject, they are a little fuzzy, not a crisp line. It is like it is just barely out of focus
  15. crismateski

    Progression of a NEW Photographer (At least I hope to be)

    Do your self a favor and dont get books on photoshop, or photoshop for a while. You are doing it the right way, play with the camera, and try and get the results you want off of the camera. Anybody can make a decent photo with photoshop, it is another thing to take a good photo. That being...
  16. crismateski

    Paha Que Tepee Shower & Outhouse tent pett porta potti portable toilet

    I already have this set up, but I can say the Tepee is a bit of a pain to put together the first time, but not bad once you have done it, and the first time you have it in the wind you will realize that it is worth every penny and the extra couple of minutes to set it up.
  17. crismateski

    Progression of a NEW Photographer (At least I hope to be)

    Good advice, especially the not buying too much too soon. There is already a learning curve, and it is easy to get overwhelmed, if you keep it simple and really learn to use what you have, you will be much happier and by the time you do buy the next item, you will know exactly what will fit how...
  18. crismateski

    The folks that sell the Flip Pac

    I don't have a flippac and don't plan on ever having one (just does not fit the way i like to camp) but hopefully it is just a disgruntled guy and not an actual problem. I know many people that have them and would hate to hear that they may have issues down the road.
  19. crismateski

    The folks that sell the Flip Pac

    I don't see your point, can you type it bigger :D Sent from my EVO using Tapatalk 2
  20. crismateski

    The folks that sell the Flip Pac

    I was killing time on craigslist today and came across this. I have no idea if anything in it is true, but it sounds like FRP has made a friend http://inlandempire.craigslist.org/rvs/3357411310.html
Top