Search results

It's pretty easy, put some regular white LED bulbs in the black out lights location. Remove the black out plastic cover piece in the lens. Then just connect the wire that goes to them to the reverse wire in the seven pin harness.

I'd just cut it where it needs it and then use the cut off portion to make a cap for the hole. Use a soldering iron to melt the patch back in.

Yep did almost the exact same to mine. Just went with a standard hitch and the chains closer to the hitch. Here you can see just how far changing to regular tires bring the height down. Those are dodge rims with 265/75r16 tires. I have since changed to six lug hubs that match my chevys, and...

The center hole on the H3 front is the same as the square body. But the silverado rim center holes are too small, and the offset is not ideal. Read the thread, covers a bunch of the info. The center hole on the Silverado rims can actually be opened up with a regular router. There are some...

You have to call or email to get the brackets. You can fit 16" rims depending on the rim itself, but 15's will never happen, even with drums. The reason for the braking improvement is the larger brake surface. The Wilwood stuff works better than the stock 1950 brake design, but doesn't come...

For the front brakes.................. Pure Chevy Sex The rear, yep larger 8.6 axle. Any 10 bolt spring axle is an easy job. The 99 up new style Silverado alxe is perfect for square bodies. The rims in my pics are close to zero offset. I've lost a couple pics in the photobucket crap, but have...

Another option, which I have, is to swap to a 99-07 new style 10 bolt. It's a really easy swap if you use one from a truck as apposed to a SUV (spring vs coils). All you do is remove the bump stops and weld on new spring pads, then move the shock mounts. Even the driveshaft with bolt up. Same 6...

12v conversion is an easy job on them. Basically just swap bulbs. Big decision for you is how you want to connect to the pulling vehicle. They make a harness adaptor, you could swap the entire assembly to the harness box, you can cut the mil end off and put a 7 lug end on it. I went with...

Might be enough room to squeeze a 1500 crew cab in there without messing with wheel base. Stuff is still looking GREAT!

Yep, then ANY 8 lug rim that is pre-metric will work fine. I prefer to check craigslist and used tire shops for stock rims. Last set I got was from dodge, but any that are not modern metric work great. example...

Pretty much any older 8 lug rim will work. The newer the rim the less likely it will work. What do you plan to tow it with? If it doesn't have 8 lugs you might think about swapping the brakes drums to six lug and then run what ever six lug you want.

With a Jeep I recommend you swap the mil tires for regular ones. Big drop in trailer weight and height, and no loss of carrying capacity.

Nice job, looks strangely familiar...................................... Eventually I'll pull the standard hitch and add a channel mount to it, making for easier height and hitch style changes.

You can re-tighten those riv-nuts pretty easily. How a riv-nut works................... https://www.youtube.com/watch?v=9HcSeSzSJGI And how I've always done mine using nuts, bolts, and washers............................ https://www.youtube.com/watch?v=DlBNfzIiNAI

If the welds aren't leaking, no reason to even touch them. Not a spot weld, it's a rosette weld. No need to fill it up.

Very nice, if I had the tailgate that would be mandatory. For spacers I'd just get some of the synthetic deck wood and make a couple spacers. Tough long lasting stuff and won't cause any rust issues.

Volume for the Bluetooth sound coming from the tablet to the amps and speakers.

I use if for everything: stereo, nav, data/internet, dash camera, fm and tv tuner. My stereo was replaced with this little gem.........................

Unless you plan to hard core wheel it, skip the 60/14 bolt swap. They are heavy and have much more drag. You do have a bunch of things you can do with the six lug axles. Hummer H3 front 4 piston brakes will almost bolt on with a bracket. A newer 10 bolt 8.6 disk brake rear axle goes in pretty...

Definitely use the ash try mod. I love mine........ I also added a pocket and larger cup holders to my center console. And then a 7" tablet mount on the dash, right above the a/c vent.