100 series factory Aux tank

[rusty_tlc]

Kind of where it will be when installed.

 

[spressomon]

Sexy pipes.

 

[4Rescue]

She's a BEAUT' mate!!!

Cheers

Dave

 

[locrwln]

Very nice.:ylsmoke:

Jack

 

[rusty_tlc]

Very nice.:ylsmoke:

Jack

What you smokin in that pipe boy?

 

[AndrewP]

Can that be fitted with the body in place?

I know in an 80, it can't.

 

[rusty_tlc]

I think so.
It may take some finagling.

 

[hoser]

Might you have the exact part number for that filler neck?

 

[spressomon]

Can that be fitted with the body in place?

I know in an 80, it can't.

Yes.

 

[rusty_tlc]

might you have the exact part number for that filler neck?

The drawing in this post
#77201

 

[hoser]

Perfect, thanks! I'm still not versed on reading the Toyota part numbers. I was looking at that diagram and saw 3-4 different part numbers pointing to the filler.

 

[TangoBlue]

Kind of where it will be when installed.

That's not the 100-series dual filler/flapper is it?

 

[rusty_tlc]

That's not the 100-series dual filler/flapper is it?

No. Dave couldn't find a part number for the neck with the divert-er flap for the 100 series. Mrs Rusty looked at it and she said she would be okay with the Y neck, and I like the simplicity of the design so we went with it. She only puts gas in the truck on rare occasions any way.

 

[TangoBlue]

Dang - I got the 100 filler PN from Japan 4x4 but its on my now TU HDD whose files I haven't been able to recover yet. Still hoping to get some practical experience from your fitment for my mods for the Tacoma fall project. Concerned about the 100 filler size and space I have for the drop to the tank... the fuel filler door on the Tacoma is just above the wheel well and possible vertical drop into the wheel well, so may have to fab a Y-type filler anyway.

Got an XJ tank (20 gal) with skid plate that fits perfectly between the frame rails where the spare tire used to sit. Fuel inlet is on the same side as the OEM filler and the tank inlet is recessed making for a tucked in fit for the plumbing.

 

[rusty_tlc]

Dang - I got the 100 filler PN from Japan 4x4 but its on my now TU HDD whose files I haven't been able to recover yet. Still hoping to get some practical experience from your fitment for my mods for the Tacoma fall project. Concerned about the 100 filler size and space I have for the drop to the tank... the fuel filler door on the Tacoma is just above the wheel well and possible vertical drop into the wheel well, so may have to fab a Y-type filler anyway.

Got an XJ tank (20 gal) with skid plate that fits perfectly between the frame rails where the spare tire used to sit. Fuel inlet is on the same side as the OEM filler and the tank inlet is recessed making for a tucked in fit for the plumbing.

It sounds like you might be better off with the 80 series filler, I don't think it has the long main tank pipe like the 100 series.