2013 Toyota 4Runner, Equipt Edition Build
- Thread starter Equipt
- Start date
Equipt
Supporting Sponsor Presenting Sponsor of Overland
A Fuso! Dang, you figured it out! Um, no. Just kidding, no Fuso.
And no Taco. Very cool, but not sure about the 3.5L either.
Sorry for the lack of communication on all this. Typical spring time. Just running too fast to start a cognitive conversation. I will start one, well, actually two build threads, very soon.
Thanks for the suggestions though.
Cheers,
And no Taco. Very cool, but not sure about the 3.5L either.
Sorry for the lack of communication on all this. Typical spring time. Just running too fast to start a cognitive conversation. I will start one, well, actually two build threads, very soon.
Thanks for the suggestions though.
Cheers,
washington taco
Explorer
I'm betting its a first gen Tundra! Seen him Paul in a FB post somewhere with a camper on a first gen Tundra.
Ace Brown
Retired Ol’ Fart
You let it out, so yes, you are correct. He is packing a FWC too.
KlausVanWinkle
Explorer
It's been about 6 months. Any updates?
Ace Brown
Retired Ol’ Fart
He sold the 4Runner this spring. Knowing Paul I'm sure he has a new build thread going.
Equipt
Supporting Sponsor Presenting Sponsor of Overland
OK!OK! Been a little busy here. Still haven't started a thread on the vehicles we have been working on. So I'll give you a little teaser. We'll start proper build threads as soon as I can breathe in.
Two trucks we are working on. A 2004 Tundra and a 2013 200 Series Land Cruiser. Both were at Expo West this year. I am bringing the Tundra and Chaser to Expo East, so come by and say hi.
Stay tuned for details. Not going to build these threads here. Sorry for the delays.
Two trucks we are working on. A 2004 Tundra and a 2013 200 Series Land Cruiser. Both were at Expo West this year. I am bringing the Tundra and Chaser to Expo East, so come by and say hi.
Stay tuned for details. Not going to build these threads here. Sorry for the delays.
Yuman Desert Rat
Expedition Leader
About time! 
NoOneBetter
Observer
Hey Paul, what shovel did you have mounted with your shovel mount? I recently picked up a shovel mount for my K9 rack but can't seem to find a shovel that fits in it. I've got a 25" d-handle shovel from home depot and its way to big and the clamp doesn't even come close to closing. I almost feel like I have the axe mount instead since my fiskars hatchet fits perfectly in it.
Yuman Desert Rat
Expedition Leader
I had a similar issue. I used a Dremel grinder to make the opening larger.
Equipt
Supporting Sponsor Presenting Sponsor of Overland
That is a very good question. Shovel handles are all over the map, diameter wise. The shovel that I have been using has a fiberglass shaft (from Lowes) on it, and it is too small. I ended up wrapping some black duct tape around the points of contact with the mount to make it fit correctly. So the issue goes both ways on that one. The optimal size diameter is between 1-1/8" and 1-3/8". The clamp will adjust within that parameter. The combo mounts that we have that hold both a shovel and an axe at the same time accommodate up to 1-1/2" diameter handles. Hope that helps.
Cheers,
Cheers,
Similar threads
