guidolyons
Addicted to Gear Oil
Can't wait for more updates. Saw your 4WD conversion pics in the UJOR project thread.
AMBOT
- Thread starter AMBOT
- Start date
AMBOT
Adventurer
I was helping my Operator try to design his electrical system. I went into the networks of Boeing, Lockheed Martin, and Darpa, while there was alot of useful information there, the raw materials needed were out of reach. Who would have thought that Cesuim 137 is not available at the corner store. I did come across the Earthroamer electrical diagram which will serve as a good model however, implemented in a more simplified way.
There has been much activity on my exoskeleton.
I can now deploy an awning to keep humans from being affected by solar radiation
I have a long tentacle that can be used to move myself or other objects.
My roof is now painted to match the rest of me and the interior joints have all been caulked so I'm feeling pretty solid now!
My human transport compartment is noisy. So my Operator is in the process of removing all the interior panels and applying sound suppression and insulation to improve my habitat.
Here are my doors covered in CLD tiles.
Here is my roof... lots of noise coming thru here, especially with the remote condenser above.
First the CLD tiles to remove unwanted resonance
Then a layer of MLV and CCF to block sound
It all fit nicely
Finally a blanket of Thinsulate insulation will be installed under my finishing panel. On to the floor and doghouse next!
There has been much activity on my exoskeleton.
I can now deploy an awning to keep humans from being affected by solar radiation
I have a long tentacle that can be used to move myself or other objects.
My roof is now painted to match the rest of me and the interior joints have all been caulked so I'm feeling pretty solid now!
My human transport compartment is noisy. So my Operator is in the process of removing all the interior panels and applying sound suppression and insulation to improve my habitat.
Here are my doors covered in CLD tiles.
Here is my roof... lots of noise coming thru here, especially with the remote condenser above.
First the CLD tiles to remove unwanted resonance
Then a layer of MLV and CCF to block sound
It all fit nicely
Finally a blanket of Thinsulate insulation will be installed under my finishing panel. On to the floor and doghouse next!
Last edited:
AMBOT
Adventurer
The old grumpy guy is a 71 monte carlo. He's all crabby because he's not getting the attention he once was. Keeps complaining why he has no passenger seat or seat belts yet.
AMBOT
Adventurer
My eyes are Anzo USA 111026 Ford Club Wagon Crystal Chrome Headlights. I can see better with them, but will definitely need assisted lighting for off road activities.
AMBOT
Adventurer
I spent 10 solid years in Texas but have now moved on with my Operator to the barren midwest.
Last edited:
AMBOT
Adventurer
AMBOT
Adventurer
My cabin interior has been reassembled with all the insulation and sound deadened materials and there is a significant decrease in engine and exterior noise and the elimination of panel rattling. Just in time for the 15* weather in the midwest.
Particular attention was paid to the dog house which received a layer of MLV, then the stock fiberglass insulation, then DEI floor and tunnel shield.
The turbo was booted and the downpipes wrapped with DEI exhaust wrap.
My voice is much clearer and louder with new JL 570CX2 5x7 door speakers and a Pioneer NEX-5000 head unit.
Here are pics of the sofa mounted in its various positions.
AMOBT out.
Particular attention was paid to the dog house which received a layer of MLV, then the stock fiberglass insulation, then DEI floor and tunnel shield.
The turbo was booted and the downpipes wrapped with DEI exhaust wrap.
My voice is much clearer and louder with new JL 570CX2 5x7 door speakers and a Pioneer NEX-5000 head unit.
Here are pics of the sofa mounted in its various positions.
AMOBT out.
AMBOT
Adventurer
flightcancled
Explorer
Awesome. Pure Awesome.
AMBOT please be sure to report back with a comfort assessment from the Operator of your new bed after your next trip.
AMBOT please be sure to report back with a comfort assessment from the Operator of your new bed after your next trip.
Bikersmurf
Expedition Leader
They don't transport dead people in ambulances... And the usually are still 'alive' when they leave the rig.
