whatcharterboat
Supporting Sponsor, Overland Certified OC0018
Hi. It was my plan to post a different vehicle every couple of weeks as I did with “Yes it an FG” and this one. But ONLY if it’s OK with you guys. I certainly don’t think forums should be a place for manufacturers to dump product advertising. That’s what our website’s for. I was really just hoping to give you guys a variety of ideas for modifications and promote FG’s as the incredibly capable offroad camper platform that they are. Also I know that our stuff is virtually unaccessable to you at the moment anyway. Let’s just say that ever since Mitsubishi started selling FG’s in the US we’ve been very interested in what transpires and we’ve been talking at work about how you guys at this forum are paving the way for a general acceptance and confidence in these vehicles and at some point, export or franchise could certainly be a viable option.
For now, enjoy the pics. This truck is a tour bus built for extended day tours. Eco tourism and university study/research groups mainly. That means they have to carry all their food, hence the large freezer in the rear boot and cooking gear (and sometimes tents and swags in a trailer). They typically do 2 week trips into the outback.
This body was actually made from the same mould as the green truck in the last post. The wheel base was extended to 3900mm and the fuel tank was stretched at the same time. Because of the power requirements of the freezer and the entertainment system we fitted a 300 ah AGM auxiliary battery bank and a battery monitoring system. These guys do it tough, sitting around the campfire at night with a data projector shining movies onto a screen on the side of the vehicle while wearing UHF headphones. 3 LCD screens on the inside as well. Also has a large inverter and heaps of charging ports for cameras, laptops, etc.
You can probably see that it has long travel suspension with dual Konis and Michelin 100’s. If you look closely at the pic showing all the suspension articulation and the truck twisting, you can see that the stripes on the body don’t line up. That’s actually the amount of flex in the chassis that’s going on under the spring mounted body. And yes, the cab tilt is still retained. Also note the table/spare wheel rack and the awning is recessed in to the roof so there’s less chance of it getting ripped off. On the roof is the aircon and a skylight/escape hatch. The high rear exhaust is actually a transport authority requirement for the State it’s registered in. I’ll put some motorhome/camper pics based on this body/cab combination up soon.
Please let me know if you want me to do this every few weeks. See ya.
For now, enjoy the pics. This truck is a tour bus built for extended day tours. Eco tourism and university study/research groups mainly. That means they have to carry all their food, hence the large freezer in the rear boot and cooking gear (and sometimes tents and swags in a trailer). They typically do 2 week trips into the outback.
This body was actually made from the same mould as the green truck in the last post. The wheel base was extended to 3900mm and the fuel tank was stretched at the same time. Because of the power requirements of the freezer and the entertainment system we fitted a 300 ah AGM auxiliary battery bank and a battery monitoring system. These guys do it tough, sitting around the campfire at night with a data projector shining movies onto a screen on the side of the vehicle while wearing UHF headphones. 3 LCD screens on the inside as well. Also has a large inverter and heaps of charging ports for cameras, laptops, etc.
You can probably see that it has long travel suspension with dual Konis and Michelin 100’s. If you look closely at the pic showing all the suspension articulation and the truck twisting, you can see that the stripes on the body don’t line up. That’s actually the amount of flex in the chassis that’s going on under the spring mounted body. And yes, the cab tilt is still retained. Also note the table/spare wheel rack and the awning is recessed in to the roof so there’s less chance of it getting ripped off. On the roof is the aircon and a skylight/escape hatch. The high rear exhaust is actually a transport authority requirement for the State it’s registered in. I’ll put some motorhome/camper pics based on this body/cab combination up soon.
Please let me know if you want me to do this every few weeks. See ya.