badm0t0rfinger's 2014 Raptor build

[badm0t0rfinger]

For sure. Lots of people use PVC.

View attachment 797194


Maybe mount it under the rack? Might help keep it away from prying eyes and the elements?

View attachment 797195

They just went with zip ties, I'd want something just a wee bit stouter, but thats essentially what I'm thinking.

 

[Todd780]

They just went with zip ties, I'd want something just a wee bit stouter, but thats essentially what I'm thinking.

Oh. Well fine then Mr. I'm too fancy for zip ties.....

 

[ITTOG]

Since you stated you can't fish just trade your poles for a kids pole or a telescoping pole. Then just throw it in your cab.

 

[badm0t0rfinger]

Oh. Well fine then Mr. I'm too fancy for zip ties.....

Oh no don't get it confused. I'm a slut for zip ties. I just want something more permanent.

 

[badm0t0rfinger]

New sway bars installed. Passenger side was knackered.



And new hubs arrived.

 

[Buddha.]

Since you stated you can't fish just trade your poles for a kids pole or a telescoping pole. Then just throw it in your cab.

Why not the little Mickey Mouse branded setups? Do they still make those?

 

[ITTOG]

Why not the little Mickey Mouse branded setups? Do they still make those?

Yeah that would work as well.

Sent from my Pixel 7 Pro using Tapatalk

 

[ricoisme26]

Wait until @Todd n Natalie and I release our OVERLAND FISHING ROD STORAGE BOX and then you can make that investment.

But seriously, no need for a roof rack or a bed rack solely for the rods, like @YetiX said you can just angle them out the back window.

I'm gonna go to Home Depot or something and pick up some PVC and order some mounts for the rack and see if I can jig something up.

I don't have a rear slider on my 2012 F150, wish i did. I have a cap (topper) on the bed (5.5 bed) as well, right now for fishing i just put the rods in the bed but for vacations after coolers and bags fill up the bed there isn't room for rods in there angled across the whole bed like they need to be.

PVC is an option for sure just need a roof rack to put the tube up there.

Or maybe just get dedicated 2-3 piece rods for salt fishing

 

[Todd780]

I don't have a rear slider on my 2012 F150, wish i did. I have a cap (topper) on the bed (5.5 bed) as well, right now for fishing i just put the rods in the bed but for vacations after coolers and bags fill up the bed there isn't room for rods in there angled across the whole bed like they need to be.

PVC is an option for sure just need a roof rack to put the tube up there.

Or maybe just get dedicated 2-3 piece rods for salt fishing

If you have a canopy already, what about something like this?

 

[badm0t0rfinger]

This just got shipped in from Australia (just kidding). Brackets will be in tmrw. Should be good enough to go to a marine deep cell battery in the bed topped up for use with a broverland style fridge.

 

[ricoisme26]

If you have a canopy already, what about something like this?

If had an 8ft bed or invested in some rods that could break down i'd go that route. don't have any rods that will fit in the 5.5 bed that way, maybe on a complete diagonal but even then the roof of the cap is significantly smaller than the bed itself because how the cap tapers

 

[badm0t0rfinger]

Can't say too much right now but I'm working with a fab shop to get bed stiffeners that work with my bed rack. Cad drawings are made, I have pictures of and it and when I get permission I'll share them.

 

[Todd780]

Can't say too much right now but I'm working with a fab shop to get bed stiffeners that work with my bed rack. Cad drawings are made, I have pictures of and it and when I get permission I'll share them.

Bed stiffeners? Bed racks? What forum am I on again?

 

[badm0t0rfinger]

Bed stiffeners? Bed racks? What forum am I on again?

View attachment 797816

*checks url*

Yeah, no... this is the right place.

 

[badm0t0rfinger]

I think I can get used to this weather.