Expeditions West 2004 Tacoma

Scott Brady

Founder
Mlachica said:
When you mentioned storage for your camera's, do you mean packed away until you arrive at your destination or for quick access?

Both actually. Quick access and secure storage. Chris has some cool ideas he is working on for quick access.
 

Super Doody

Explorer
Hey Scott,

Very impressive truck with a lot of toys:26_7_2: . Just wondering why you are still using your stock upper control arms instead of uniball type (TC, Camburg).\
 

Scott Brady

Founder
Super Doody said:
Just wondering why you are still using your stock upper control arms instead of uniball type (TC, Camburg).\

Noise... Though the new DR control arms are major drool factor and are supposed to be quiet too.
 

edgear

aventurero, Overland Certified OC0012
expeditionswest said:
My Camburgs get rather squeaky from time to time, but Demello suggested a shot of WD40. Seems to do the trick & make them silent again!
 

Ridgewalker

Adventurer
This thread has been quite educational.
Although, Scott, with all the additions to your Taco DC I think it is getting close to time for the Dana 60 axles.
Just kidding!
 

toyrunner95

Explorer
i got a rear 60 full float he can have for free. ill even bring it to him in WA. on his way back hme from the arctic trip.
 

nvprospector

Adventurer
tacozona said:
My Camburgs get rather squeaky from time to time, but Demello suggested a shot of WD40. Seems to do the trick & make them silent again!

Greengrease is good stuff and have used it until I found Militec grease. I found it worked best here in the Southwest for me because it does not attract dust also it does not wash out to easily when in the water. I also use their grease and oils for all my weapons and I put them through hell when on the job.

Can be purchused here

Companies Website
 

Scott Brady

Founder
31" wide
10.5" tall
~23" long

:)

One of the best mods I have done to my truck. Simple, easy to do (1 day) and a 600+ mile range
 

Scott Brady

Founder
I left it out purposefully. I was concerned about the liability associated with the plumbing/fuel.

send me an email and I will shoot you the pictures.
 

blupaddler

Conspirator
You can also look over at www.ih8mud.com under the 80's section.
Kevin, aka Boston Mangler, has a very well written write-up for the 80 series. And the install is very applicable to other vehicles. Just FYI.
 

LAW

Adventurer
expeditionswest said:
31" wide
10.5" tall
~23" long

:)

One of the best mods I have done to my truck. Simple, easy to do (1 day) and a 600+ mile range
thanks!
sadly it will only get me a 350 mile range. it will be a direct replacement for the gas tank that was claimed at AZ rocks.
i will be taking some measurements and see if i can get it to fit in front of the rear axle, slightly sunk into the bed of a new flatbed that is in the works :D
 

Forum statistics

Threads
189,807
Messages
2,921,118
Members
232,931
Latest member
Northandfree
Top