HEAT

Yeh... Price...
The AT tool box is going for what ? $1700
That's too rich for me..besides I like to mod things quite a bit.
I was looking at their newest unit..Propex HS2211.
It can be mounted under the rig.. or upright...
I want to store mine inside but be able to set it up on my swing out when in use.

http://westyventures.com/propex.html
HS2211mockup%20(1).JPG


Excuse the big pic...


Besides the diesel units, I like to think these are the safest options ....
I have read a few articles about people dying from CO2 poisoning when using other methods to heat their tents.
 
Last edited:
Well, my little chiminea has a downward facing mouth, so, if I ventilated it properly, I don't see much of an issue if I set it up right. It wouldn't be any different than heating a house with a fireplace. Considering there's only enough room in it for a twig-fire, my only concern would be oxygen depletion, and not CO2 (if it's exhausted properly). I see this as a possible solution....

But I'd have to cut a hole in something....and I'm squeamish about that.
 
a low tech solution i used in korea and at fort drum was a few candles in a coffee - soup can. i have used just one candle under a poncho between my feet when stationary in -0 temps and lower. but in a vehicle that has good, good meaning you can feel the wind causing a draft when the vehicle is off and a slight breeze is blowing, a few candles in a can can make a lot more heat that you think. well if it is really cold anyway.
 
a low tech solution i used in korea and at fort drum was a few candles in a coffee - soup can. i have used just one candle under a poncho between my feet when stationary in -0 temps and lower. but in a vehicle that has good, good meaning you can feel the wind causing a draft when the vehicle is off and a slight breeze is blowing, a few candles in a can can make a lot more heat that you think. well if it is really cold anyway.
I have a kerosene lantern that does that much 8] I let burn all night, but I just make sure it isn't burning too rich.
 
Like the candle, but cleaner burning...

Take a 1 quart pain can and fill 3/4 full with perlite/vermiculite. Add 8 oz. 91% isopropyl alcohol, light. Fumes are light, but carbon monoxide can still kill you, so crack a window. Nice thing here is you can snuff it with the lid and seal it from spilling. It's called a "plumbers stove".


Brought to you by Cyberdyne Systems
 
Like the candle, but cleaner burning...

Take a 1 quart pain can and fill 3/4 full with perlite/vermiculite. Add 8 oz. 91% isopropyl alcohol, light. Fumes are light, but carbon monoxide can still kill you, so crack a window. Nice thing here is you can snuff it with the lid and seal it from spilling. It's called a "plumbers stove".


Brought to you by Cyberdyne Systems

I want to try this just for the heck of it! Curious about burn time.
 
How much heat does that make, from a non-BTU perspective (earthy layman's terms)?

Well, for comparison, I think the Little Buddy makes 5000 BTU.

It's a surprisingly decent heat source. Kept my RTT above freezing in some cold and very windy weather.

A.
 

Forum statistics

Threads
190,913
Messages
2,930,156
Members
234,789
Latest member
Fj89

Members online

Top