Put together my modified spray booth today.
This is to limit dust and wind exposure to the camper plug’s primer stage and the mold/product gelcoat stages.
Thin mil plastic on the top and 3 house/wall facing sides of the garage. The garage door facing side has a thick pvc material that kills the wind, but the bottom is open to allow for fume ventilation. Between the water heater/furnace pilot lights I’m taking some extra precautions to keep the fume concentration to a minimum.
That plexi panel is to film for the YouTube series without overspray on the camera. I have a bathroom-vent fan and box fan to ventilate later in the day, but DONT use these with heavy fumes as they are not sealed motors and can spark = no fun.