DrMoab
Explorer
Have they turned at all? If you have started them to spin just go get a sawzall and cut them on both sides between the shackle and the spring and the same on the front hanger. Its always been the case with me that it's the bushing they seize too, not the nut. If you have turned them at all then after you cut the bolt it spins out easier (note, I did not say easy).
I will second the anti-seize though. Once you put it back together slather those babies up before your done.
I will second the anti-seize though. Once you put it back together slather those babies up before your done.