Vogold
Member
I added a Quick Pitch en-suite to trailer with a bit of a twist... I put it on an articulating T.V. mount so I could pull the shower tent out far enough to clear the fender and then use the fender as a shelf to set your cloths or whatever on while you shower. The T.V. mount extends 14” and is rated for 110 pounds, the shower tent and aluminum extrusion I added to it comes in at about 18 pounds. The mount cost me $40.00, so I’m not out that much if it ends up not working long term.
Strapped down to keep the T.V. mount retracted
![1CC9E7AA-CA23-41CA-8984-1DBACBF31B56.jpeg 1CC9E7AA-CA23-41CA-8984-1DBACBF31B56.jpeg](https://expeditionportal.com/forum/data/attachments/536/536465-a151bae2dacf9be43dbc8591aa9ac495.jpg)
Deployed with the Drifta top cover on.
![E56BA2A5-0B49-4CB2-A6F8-9681AE777DEB.jpeg E56BA2A5-0B49-4CB2-A6F8-9681AE777DEB.jpeg](https://expeditionportal.com/forum/data/attachments/536/536467-8163a6ff6b6eb7b5eaa8e25918795027.jpg)
From the inside with the access zippers down, allying access to the bullfinch shower temperature mixer, the fender, and allows the light to shine into the tent if need be.
![579E5ABD-A97A-417E-BBCD-8122821BE579.jpeg 579E5ABD-A97A-417E-BBCD-8122821BE579.jpeg](https://expeditionportal.com/forum/data/attachments/536/536470-4b2207b37e76170747ddbd782667369a.jpg)
Close up of the T.V. mount. Those brown bumpers on the aluminum extrusion are acting as spacers, to get rid of the slop when in the stowed position.
![0359E063-C573-4669-87DB-62C9D22F7D40.jpeg 0359E063-C573-4669-87DB-62C9D22F7D40.jpeg](https://expeditionportal.com/forum/data/attachments/536/536471-25030fa42fc1f640aedf6e3b11fa172e.jpg)
Strapped down to keep the T.V. mount retracted
![1CC9E7AA-CA23-41CA-8984-1DBACBF31B56.jpeg 1CC9E7AA-CA23-41CA-8984-1DBACBF31B56.jpeg](https://expeditionportal.com/forum/data/attachments/536/536465-a151bae2dacf9be43dbc8591aa9ac495.jpg)
Deployed with the Drifta top cover on.
![E56BA2A5-0B49-4CB2-A6F8-9681AE777DEB.jpeg E56BA2A5-0B49-4CB2-A6F8-9681AE777DEB.jpeg](https://expeditionportal.com/forum/data/attachments/536/536467-8163a6ff6b6eb7b5eaa8e25918795027.jpg)
From the inside with the access zippers down, allying access to the bullfinch shower temperature mixer, the fender, and allows the light to shine into the tent if need be.
![579E5ABD-A97A-417E-BBCD-8122821BE579.jpeg 579E5ABD-A97A-417E-BBCD-8122821BE579.jpeg](https://expeditionportal.com/forum/data/attachments/536/536470-4b2207b37e76170747ddbd782667369a.jpg)
Close up of the T.V. mount. Those brown bumpers on the aluminum extrusion are acting as spacers, to get rid of the slop when in the stowed position.
![0359E063-C573-4669-87DB-62C9D22F7D40.jpeg 0359E063-C573-4669-87DB-62C9D22F7D40.jpeg](https://expeditionportal.com/forum/data/attachments/536/536471-25030fa42fc1f640aedf6e3b11fa172e.jpg)