Get your tickets to THE BIG THING 2026!

OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

I did. Ordered two Magzo Magnetic Thermal Insulted Door Curtains- 60" x 80 " from Amazon, one complete door curtain fits one side of the camper with easily a foot to spare front and back that I tuck behind the lift panels. There is only about an inch and a half at the top I had to cut to seperate the two curtains. They come with velcro loop already sewed along the top and OVRLND also has velcro loop installed. I had some extra velcro hook, I put it back to back to create a two sided velcro hook that stays on the Magzo and attaches to the OVRLND. Had a family member sew the two pieces together per side, this was done after I took these pictures. The bottom of the curtains have magnets built in so I bought some magnetic tape but the tape I bought has really weak magnets so for now, the curtains just hang down. Pros: total cost $80- got the Magzo's on black Friday for about $40 each. They say they are water proof. They definetly keep the camper warmer inside. When I pulled the DIY Arctic Pack off there was a very noticible temp difference between the my DIY insulation and the campers canvas. The campers canvas was same temp as outside, about 24 F. Inside, with out running diesel heat was about 32 F. It felt like the camper heated up faster when I was using the diesel heater. They also keep the camper darker. Cons: I didn't make a window, but when I want to look out, I just pull down the velcro to peek out the window. They roll up a bit bigger than OVRLND's Artic Pack due to thermal quilting.

I think I read somewhere that OVRLND is testing out some new quilted fabric for theirs. I also do not leave them up when I put my roof down, I think many people with OVRLND's Artic Pack do leave them up full time.

IMG_0677.JPGIMG_0679.JPGIMG_0680.JPG

 
I did. Ordered two Magzo Magnetic Thermal Insulted Door Curtains- 60" x 80 " from Amazon, one complete door curtain fits one side of the camper with easily a foot to spare front and back that I tuck behind the lift panels. There is only about an inch and a half at the top I had to cut to seperate the two curtains. They come with velcro loop already sewed along the top and OVRLND also has velcro loop installed. I had some extra velcro hook, I put it back to back to create a two sided velcro hook that stays on the Magzo and attaches to the OVRLND. Had a family member sew the two pieces together per side, this was done after I took these pictures. The bottom of the curtains have magnets built in so I bought some magnetic tape but the tape I bought has really weak magnets so for now, the curtains just hang down. Pros: total cost $80- got the Magzo's on black Friday for about $40 each. They say they are water proof. They definetly keep the camper warmer inside. When I pulled the DIY Arctic Pack off there was a very noticible temp difference between the my DIY insulation and the campers canvas. The campers canvas was same temp as outside, about 24 F. Inside, with out running diesel heat was about 32 F. It felt like the camper heated up faster when I was using the diesel heater. They also keep the camper darker. Cons: I didn't make a window, but when I want to look out, I just pull down the velcro to peek out the window. They roll up a bit bigger than OVRLND's Artic Pack due to thermal quilting.

I think I read somewhere that OVRLND is testing out some new quilted fabric for theirs. I also do not leave them up when I put my roof down, I think many people with OVRLND's Artic Pack do leave them up full time.

View attachment 908366View attachment 908367View attachment 908368

I have a 60x80 Magzo screen for the back door (barn door version) of my Ovrlnd, that has been great and lasted 5 years, though with rolling up to store over time the screen material did start to fatigue/split. Not unexpected and OK by me for the price.

Didn’t know they made these thermal curtains, but in checking them out on Amazon, saw that they will also do custom sizes for a really reasonable cost. I’m gonna do one for my home and will post how the custom thing comes out.

Just FYI for everybody.
 
Speaking of Asheville, if anyone has one in western north Carolina I’d like to check it out. We’re seriously considering ordering one but haven’t seen one in person. A friend of mine said he saw one in Asheville a week or two ago also.
 
We recently drove to Flagstaff from Durango and took a look around to see what options and such we wanted. Now, the order is finalized and deposits made so we are in line for a possible mid April delivery. So many little things we think about and they have all been really helpful there. Started ordering stuff for building it out. '22 Tacoma Access Cab with 6' bed.

Going with Bluetti power unit and Propex furnace. Not sure how I'm going to do electrical stuff but looking at several options. This is also "camper lite" as we have a '14 Sportsmobile Econline for any extended camping trips.
 
Interior touch ups coming along nicely. Added some coroplast panels to the lower area and doors. Anyone have suggestions for the upper area? Coroplast is way too thick to fit between bed panel and the wall.

Plus added Reflectix window covers, and some magnetic bug nets.

Found the bug nets at an auction site. $20 for all three isn’t half bad but I have to trim them to length.

IMG_1581.jpeg
 
Added some coroplast panels to the lower area and doors. Anyone have suggestions for the upper area? Coroplast is way too thick to fit between bed panel and the wall.
Keeping in mind my Ovrlnd is a ’21, with a 10” cabover and things may have changed, I was able to get 95% of it covered except the narrow strips where the sliding panel really contacts the wall. I DID have to take off and trim the corners of the wood bed rail at the foot to clear. Around the permanently fixed panel I was able to stuff some 1/4” closed cell foam/radiant barrier sandwich insulation around the edge cracks. The coroplast continues to wrap around the bed in the front.
1770656218512.jpeg
I can get some detail pictures near the front later in the week if that would help. There were a couple spots where the sliding panel would catch the coroplast edge when it was lifted to slide back, but was able to tack those down.
 
Anyone have suggestions for the upper area? Coroplast is way too thick to fit between bed panel and the wall.
I used the Amazon adhesive carpet tiles everywhere in my camper, including in front of and on the sides of the bed slide. They are thin enough to not cause any issues.

I also like having the carpet on the walls, it makes it nice to add things via velcro wherever I want.

 

Forum statistics

Threads
191,302
Messages
2,935,380
Members
235,275
Latest member
Wolfbox
Top