idk i took it on the morning of may 9th, which means i was heading from denver to cali, so im guessing its somewwhere in Wyoming maybe Utah. But ive never been to Montana though.
Post Pic's of your Jeep
- Thread starter jwhutch
- Start date
SWbySWesty
Fauxverland Extraodinaire
1997 XJ SE
5.5 RE heavy duty long arm kit
AA SYE
Tom Woods driveshaft
4.56 gears
aussie locked front and rear
33x10.5 BFG A/T
hi/lo HID headlights in the mail
on the list to come:
CB radio & antenna
Tomken gas tank skid
OR Fab front winch bumper
3 HID ACRO lights on bumper
AJ's Offroad Armor Tanker rear bumper
rock rails (most likely AJ's)
8,500 lb winch
custom cut hood vents
T&J's Performance Jeepspeed roll cage
and much much more...
5.5 RE heavy duty long arm kit
AA SYE
Tom Woods driveshaft
4.56 gears
aussie locked front and rear
33x10.5 BFG A/T
hi/lo HID headlights in the mail
on the list to come:
CB radio & antenna
Tomken gas tank skid
OR Fab front winch bumper
3 HID ACRO lights on bumper
AJ's Offroad Armor Tanker rear bumper
rock rails (most likely AJ's)
8,500 lb winch
custom cut hood vents
T&J's Performance Jeepspeed roll cage
and much much more...
getlost4x4
Expedition Leader
painted my wheels today
Yosh_Lopez
Observer
Go4Lo
Explorer
A few pics of my current 1999 MJ project. 90 MJ stripped exterior and interior, new paint, donor 99' XJ for interior, drivetrain, doors and front clip.
99' front clip
99' doors
bed back on, rear quarters trimmed and corner guards added
Still a LOT more to do but one day she will be ready!
99' front clip
99' doors
bed back on, rear quarters trimmed and corner guards added
Still a LOT more to do but one day she will be ready!
CJ7 Maniac
New member
Im new here and thought I would say hay, so here's my rig. Its almost done, I just got to here it run for the first time last week in almost 3 years. Ill have to upload some pictures so I can post some of where it is now.
These are old pics!
This is right after I painted it and rolled it out of the garage for the first time
These are old pics!
This is right after I painted it and rolled it out of the garage for the first time
mudbutt
Explorer
Here's my junk.... Yes it's purple
'98 sport 80k on the clock.
4.5" BDS long arm lift
AA SYE
Tom Woods driveshaft
BFG 32x11.50 AT's
JKS BPE's
Heavily modded roof rack with IPF 868's
Detours Tailbone
Dynomax cat back system
Homebrew rockrails
HP D30 w/Big Boar locker
8.25 Chyrco w/ARB airlocker
4.10 gears
Homebrew gas tank skid/receiver
AFE cold air intake
Still to go:
Currie HD steering
Steering box reinforcement/brace
New HD radiator
Flowkooler water pump
OBA
Winch(maybe)
Some other junk......
'98 sport 80k on the clock.
4.5" BDS long arm lift
AA SYE
Tom Woods driveshaft
BFG 32x11.50 AT's
JKS BPE's
Heavily modded roof rack with IPF 868's
Detours Tailbone
Dynomax cat back system
Homebrew rockrails
HP D30 w/Big Boar locker
8.25 Chyrco w/ARB airlocker
4.10 gears
Homebrew gas tank skid/receiver
AFE cold air intake
Still to go:
Currie HD steering
Steering box reinforcement/brace
New HD radiator
Flowkooler water pump
OBA
Winch(maybe)
Some other junk......
Attachments
dukegnarley
Observer
Almost done!!
just limit straps and some plumbing left!
btw that's 40.5" under the wheel (or about 1144 on a 20 degree RTI)
just limit straps and some plumbing left!
btw that's 40.5" under the wheel (or about 1144 on a 20 degree RTI)
OverlandZJ
Expedition Leader
^^^^ That my friend looks great! Have an in-depth fab thread anywhere?
I'm assuming that's a factory LJ soft-top?
I'm assuming that's a factory LJ soft-top?
dukegnarley
Observer
yeah It's a factory LJ top. the build thread is at
http://www.jeepforum.com/forum/f12/length-envy-build-thread-629700/
