I almost never need to haul two people in the back of my jeep, but sometimes need to carry one and my small dog. The stock back seat takes up most of the storage space and doesn't really give the passenger much leg room. I took this seat out of a Mitsubishi Montero and built my own bracket to mount it to the jeep fender well, it bolts down to the stock seat mounts on the right side and through to top of the wheel well to a backing plate. The seat is much thinner than the stock one so even though I mounted it a little farther back for leg room, I didn't really lose much space behind it and gained all the storage to the side. Then I built the platform for the dog med to go on, it also bolts to the stock seat mounts and is just big enough for my ice chest to fit underneath. Both fold up out of the way so that I don't have to remove anything or plan ahead when I want to carry something large in the back. If I ever need to put two people in the back, I can unbolt this setup and bolt the stock seat quick release mounts right back in