Post Van Parts For Sale Here please

[Bikersmurf]

I'm sure any fine cutting/polishing agent would work when applied with elbow grease. The Buffer was easy when I was polishing the whole truck... Took 15 years off them in less than about 5 minutes.

'Autosol' Works wonders on metals... Bought seats off a guy who swore by it, and had used it firsthand.

 

[89s rule]

I have a complete front suspension (no calipers) from a 2014 E350, 20 miles on it that has been hanging around. If someone has a worn out 2wd suspension it would be a nice upgrade. $500 plus freight.

@ujoint
Can you still run 16" rims with this setup? I have factory OBS aluminum 16x7 on my e350. Spoke/messaged with you sometime over the last year about a similar package but just couldn't do it at the time. Have since upgraded rims and need to refresh/rebuild my front end. Includes everything other than calipers and brake lines? How about sway bar/mounts, etc? Feel free to PM if that's better/easier.

 

[Desert Dan]

From a 2008 Ford Passenger Van all seats are in excellent condition. No wear scratches or tears.

Two (2) Ford Econoline Van Factory Original OEM adjustable captain chairs with arm rests (Tan vinyl and leather) (with quick release bases & legs, bolts not included)


One Ford Econoline Van Factory Original OEM 3 Person 2nd row Bench Seat with arm rests (Tan vinyl and leather) (with with quick release bases & legs, bolts not included)

$600 for all.

Local pick up only. I'm in the LA area near Pasadena, CA.

PM me for more information

 

[ujoint]

@ujoint
Can you still run 16" rims with this setup? I have factory OBS aluminum 16x7 on my e350. Spoke/messaged with you sometime over the last year about a similar package but just couldn't do it at the time. Have since upgraded rims and need to refresh/rebuild my front end. Includes everything other than calipers and brake lines? How about sway bar/mounts, etc? Feel free to PM if that's better/easier.

Yes, 16's will work. I'll have to double check on the sway bar but yes, complete less the calipers and possibly springs... Will ck in the AM.

From a 2008 Ford Passenger Van all seats are in excellent condition. No wear scratches or tears.

Two (2) Ford Econoline Van Factory Original OEM adjustable captain chairs with arm rests (Tan vinyl and leather) (with quick release bases & legs, bolts not included)


One Ford Econoline Van Factory Original OEM 3 Person 2nd row Bench Seat with arm rests (Tan vinyl and leather) (with with quick release bases & legs, bolts not included)

$600 for all.

Local pick up only. I'm in the LA area near Pasadena, CA.

PM me for more information


View attachment 291364View attachment 291365View attachment 291368View attachment 291367View attachment 291369

Those are great seats!

 

[hogasm]

@ujoint
Can you still run 16" rims with this setup? I have factory OBS aluminum 16x7 on my e350. Spoke/messaged with you sometime over the last year about a similar package but just couldn't do it at the time. Have since upgraded rims and need to refresh/rebuild my front end. Includes everything other than calipers and brake lines? How about sway bar/mounts, etc? Feel free to PM if that's better/easier.

89 if you don't get this I would like to be next in line. My 97 only has 565k on the original front end and is in need of love

 

[ujoint]

@ujoint
Can you still run 16" rims with this setup? I have factory OBS aluminum 16x7 on my e350. Spoke/messaged with you sometime over the last year about a similar package but just couldn't do it at the time. Have since upgraded rims and need to refresh/rebuild my front end. Includes everything other than calipers and brake lines? How about sway bar/mounts, etc? Feel free to PM if that's better/easier.

The sway bar and straps are there, steering, coils too (V10) No ABS sensors or calipers. Give me a shout if you want it!

 

[89s rule]

The sway bar and straps are there, steering, coils too (V10) No ABS sensors or calipers. Give me a shout if you want it!

PM sent.

 

[Randall Dee]

I have a grey OEM carpet out of my 2006 Ford Econoline. It's the piece from the seats back. Good cond. Local pick up only in Portland, OR. $20.

Also, I'm looking for some rear pop out windows for my 2006 Econoline van if anyone knows of a set. Even a single one would help.

 

[philos]

I happen to have several pop out windows, but I'm too afraid to ship glass so it's local pickup in SoCal... Sunland/Tujunga area.
I have:
Two passenger side REAR pop outs with factory tint.
One driver side REAR pop out, no tint.
One each (one set) side "barn door" type pop outs, no tint.
One each side regular rear windows that do not pop out, no tint.
And one set of CR Lawrence 60/40 barn door type windows if you'd like to cut a couple holes in your van.
Rear pop outs are $50 per window, tint or no tint.
Side pop outs are $50 each.
Rear regular windows are $35 each.
Side CR Lawrence aftermarket windows are $50 each.

I'm also still sitting on a passenger rear CR Lawrence T-slider, NOS, in original box. $85.


Sent via flux capacitor

 

[Randall Dee]

If you were closer to me Philos I'd be all over those rear pop out windows.

 

[mgmetalworks]

If you were closer to me Philos I'd be all over those rear pop out windows.

I see them fairly often in local Pick n Pull yards. I got a set out of a van at the Sherwood location not too long ago. They get a lot of turn over in those yards so check back often. They have locations all over the Portland area.

 

[philos]

What MG said.
I'm sitting on all the pop outs due to an expiring credit at my local pick a part. It may take a few trips, but they're pretty common.
Cheers


Sent via flux capacitor

 

[CrabbyMcNab]

Found roof racks with attached ladders, used, $350 OBO in Virginia:
http://washingtondc.craigslist.org/nva/tls/5076905486.html

 

[CrabbyMcNab]

Still have the front seats if anyone is interested. Couple of benches as well.

 

[Ernvil]

I'm selling a set of 17x9" Mickey Thompson Classic III wheels. 8 on 170 bolt pattern, good condition. Here's a link to my CL ad, and as it says, I can send actual pics of the wheels upon request. I'm in Tucson, but travel to northern AZ often and can meet an interested buyer. $300.

***SOLD***