Post your Mitsubishi Pajero Pics

[gaston7]

Finally got the rack bolted on and the RTT mounted. So pumped and ready for Big Sur next weekend.

Also...decided to tackle a DIY rear door table yesterday and this is the end result.

Wood, 2 hinges, wire, and a strap.

Cut the wood to size

Stuck on some cheap wood lookin vinyl for easy mess cleaning.

Mounted it to the rear door and called it a night.

1995 Montero SR
33"X10.5X15 BFG AT KO

You can always make more money, but you can't make more time. Get out there!

 

[jeep-N-montero]

Finally got the rack bolted on and the RTT mounted. So pumped and ready for Big Sur next weekend.

Also...decided to tackle a DIY rear door table yesterday and this is the end result.

Wood, 2 hinges, wire, and a strap.

Cut the wood to size

Stuck on some cheap wood lookin vinyl for easy mess cleaning.

Mounted it to the rear door and called it a night.

1995 Montero SR
33"X10.5X15 BFG AT KO

You can always make more money, but you can't make more time. Get out there!

Which gutter mounts did you use for the rack?

 

[gaston7]

Which gutter mounts did you use for the rack?

Yakima 1A towers and then i just bought pipe from home depot.


Sent from my iPhone using Tapatalk

 

[jamesjay]

95 montero



my new montero project

 

[JordanM/S]

View attachment 218158View attachment 218159

my new montero project

I want to paint the lower half of my montero sport just like this, What did you use to paint the part with?

 

[jamesjay]

I want to paint the lower half of my montero sport just like this, What did you use to paint the part with?

It was all ready painted when I bought it and the owner before only told me he plastic dipped the hood but you can go to any auto store or lowes and by the paint in a spray can

 

[SoCalMonty]

Gaston, I love the finish on the table. Nice!

 

[gaston7]

Gaston, I love the finish on the table. Nice!

Thanks Sean...super cheap and easy. .89 cents per square and they just stick right on. Pretty stoked on the end result. Will be putting it to the test this weekend.


1995 Montero SR
33"X10.5X15 BFG AT KO

You can always make more money, but you can't make more time. Get out there!

 

[Cristian1]

This is my `93 Pajero SWB, 3.0 manual, 2in bodylift, "32 Simex replica tyres + modified rims, and cut-out valve for exhaust.

 

[KarmannMarco]

Sweet SWB! Love the wheel and tire combination

 

[Souper]

Newbie here! Long time fan of the Monty first time owner. 98 Monty gen 2 I believe not sure if 2.5. 3.5 v6 4wd with rear locker. On 31's factory plasti dipped wheels. Planning my first mods for upper Midwest exploration.

Sent from my iPhone using Tapatalk

 

[JordanM/S]

Newbie here! Long time fan of the Monty first time owner. 98 Monty gen 2 I believe not sure if 2.5. 3.5 v6 4wd with rear locker. On 31's factory plasti dipped wheels. Planning my first mods for upper Midwest exploration.

Sent from my iPhone using Tapatalk

Nice, How are the wheels holding up? Do they chip easy? Where are you from in the Midwest?

 

[Souper]

Seem to be holding up great. Little scuffs on the lugs but barely noticeable. They look great paired with the brig. Dueler 31's. I based outta northern MN on the coast of Lake Superior. It's dusted this winter off like it was nothing lol.


Sent from my iPhone using Tapatalk

 

[jeep-N-montero]

Seem to be holding up great. Little scuffs on the lugs but barely noticeable. They look great paired with the brig. Dueler 31's. I based outta northern MN on the coast of Lake Superior. It's dusted this winter off like it was nothing lol.


Sent from my iPhone using Tapatalk

Your Monty is a gen 2.5, not a gen 2, many differences between the two generations.

 

[Souper]

Like a said I'm new can you tell me what the differences are?


Sent from my iPhone using Tapatalk